Search:

Hello all,

I need advice. I am going to build a gazebo of sorts. It will consist of 3x3, 1/8" thick square tube sticks.

I will have shades and the like on it and it could behave like a sail so...

So in my 200e I have a 10lb spool of .035.

I was welding away today and experienced a case of the wire not maintaining the set speed. It got slower and slower. It continued this even after I...

So I need a tube, 1.25" to use as a ball mount to pull a small utility trailer.

The local metal supplier doesn't have square tube with the same wall thickness as the store bought tube (3/8" I...

So here is the next in my long list of stupid welding questions.

200e running on a 30 amp 110 volt circuit.

I am going to weld up a trailer hitch insert...so the part the ball sits on. I have...

BTW, I posted my two questions in the general welding forum. Probably best to answer then there if you were of a mind to.

Thanks

So I have a new 200E.

I am in the process of mapping the dashes on the dials to real world measurements (FPM and voltage) and for that I have a question. I am currently using a 110 circuit but...

Apparently we are supposed to show where we are.

So I have been welding for a few years off and on. I burned up a Crutchfield Hauser or some such cheap welder bought off of Craigslist. I'm not...