Search:

CallMeBurton,

The Method To The Madness is that with some brands of water cooled TIG torches and water coolers the water fittings have left handed threads and the inert gas fittings have right...

Hi Barry,

I am glad that the ampere reduction when going from straight argon to a helium + argon mix is 1.5:1 . I also read somewhere or saw on Youtube that straight Argon the AC balance needs to...

YOUR customer support tells me that Prestone Lowtox and Peak Sierra propylene glycol automotive antifreezes cannot be used for welders. Dow is the oldest glycol antifreeze manufacturer on the market....

I see that the technology has improved over what went on during my first TIG course in 1984. I have been over to Arc-Zone and some of their tingsten grinders are as easy to use as a power pencil...

Hi Mark,

First of all, I would NOT retrofit a new DINSE panel socket to anybody's welder until it is at least twice as old as the warranty. Even then, I would rather use the same size panel socket...

I forgot to mention that flow of high frequency current in the water lines can be attenuated by installing high frequency ferrite magnetic cores around each fuild line of your TIF torch. That fat...

Wade, i would not laugh if it turns out that you are commanding good money for your sculptures. I wish that I had the talent to be a movie star or whatever.

Back in 2001 when I was working for...

Hey Blaster. One of the documents at Arc-Zone.com says that the coagulants in automotive antifreeze will plug up your TIG torch. Hood Chemical says something similar.

Hey Mark, all of the low...

I cannot refind the thread but somebody asked a product question to effect, "Can any of the large machines be built to accept 380 volts 3-phase 50 Hertz instead of single phase power?"

Therefore,...

I looked up DINSE SKS 120 plug and found on the American website 2 different versions of the same PDF document and on their European website 2 different PDF files one of which explains some things...

Dexcool is base on ethylene glycol which is poisonous to humans, pets and wildlife. I am posting about how to find propylene glycol coolants where the worst things in it are the rust inhibitors....

Hi,

This is my first post. My name is Mike Cole.

I have done some research on propylene glycol antifreeze for water cooled TIG torches and water cooled MIG guns. I have found 3 alternatives to...