Search:

so far a little over a month

Thanks Mark, I will give you a call to get Oleg's Contact Info

I went with the Lincoln Precision Tig 225. More old school but got some good local testimonials. I just need a machine that works.

My Choke was only wrapped 9 times and i got 11 or 12 onto it. I...

first problem turned out to be arc gap, cleaned, set and back in business. second time around was the 4043 chip, display jumps to 400 something amps. chip replaced back in business for a week. same...

Thought i would jump on here to try and encourage a response from Everlast about our 5th time broken down 250ex. It is not a year old and has an issue every time we need it. I have performed repairs...

Geezer, Thanks for the link, I checked it out and at one point he mentioned just about anything can be welded with an 035 or 045 gas shielde, flux core wire on a conventional MIG. That's good news...

Geezer, that was my thought after two days of messing with it but I hate to give up. I don't need to be able to weld it....I just want to. It's kind of a curse, I always push to learn new things,...

welder label and box lid from wire

first 2 i ran my usual .035 just to make sure i didn't bump my head and loose all ability to make decent looking bubble gum!

I am working on uploading pix.

the welder does a good job running .045 solid wire so i don't suspect the flux core wire is too big, however i use .035 L56 wire for about everything else.

The...

Just wanted to throw out my experience with the 250. I did have some problems with the welder in the first few days (looked like shipping prob maybe) but Ray and everlast hooked me up and got my...

keep getting these little long pits that look like a worm crawled through the puddle.

INFO: I am using .045 Lincoln outershield elite in my Power Mig 255. I installed the proper feed rollers,...

Registered, Check
Post: Please enter me in the Everlast Greenbucks Contest. Check
I have one post (had to figure out how it worked, lol)
Signature and avatar done, and as for an intro here we go:...

very cool. anything to be unique is awesome, and safer as well.....nice!