Search:

Yeah, you don't do it, unless you have a death wish.

No. Not at this time. I guess we don't have maybe 3 or 4 requests each year, or at least I don't come across that many.

Welcome. We are here to help.

Call the guys at 877 755 9353 ext 207. It sounds as if the breaker is tripping and you have a bad pcb or igbt in the unit.

Yes, there is a separate part for AC. But it would be repaired, not replaced as the components are replaceable on the board on that machine.

The AC side of the inverter sounds like it has had it. You need to talk with the guys over at ext 207.

If you've over flexed the torch, you could have a small crack in the neck.

Looks like mixed gas, or your welder is too close to where you are welding, or it is contaminated gas.
And clean that mill scale that isn't quite clean yet.

No. This is screen printed on.

Its RAL 6018. We've put that paint code on here somewhere.

If its fairly new, call and ask about warranty on the cover.

For those of you needing a water cooler we've had quite a bit of new ones shipped in. Some one added an extra zero to the order? lol. Anyway, there are a lot of them, and we need the space in the...

The 200 is the better of the two.

It sounds as if it is in 4T. Move to 2T or pedal mode. Unfortunately that factory folded up as far as I know. We moved production to our other factory in 2012.

Now, if it has failed, I do...

They will until they go out of business doing it. If the unit failed after shipping it back to you, then you need to contact the company direct. They don't make you pay shipping again if it was...

IF a customer wants to keep their warranty in effect, then they should follow our advice. You can bet and suppose a lot here. Fine, but when it comes down to it, use the stuff that the industry...

I'm sorry MC5W. But lets not revive 5 year old threads.

Inverter welders can use lower amperages because of Arc force, but that will depend upon the settings. 90 amps is still 90 amps. It...

No. The torch stays in the negative for all TIG operation. Download your manual from the website. It is up on it. It covers pretty much everything as far as setup....

Spot settings will get you everytime.

Inductance 75%. Start there. The results will vary based off the user's experience in setting a manual pulse. The 350P is a type of synergic pulse. It doesn't really equip you to set the manual...

The board sounds dead. You have a five year warranty on the unit. Call 877 755 9353 ext 207 to initiate a warranty claim and for further diagnosis. Depends upon how long you've had the unit, but...

Depending upon where you are, you will also save the tax.

You'll need about any 60 gallon compressor to keep up.

Mike,
Let's keep things simple here. I understand what all you are saying, but if you want to be helpful, boil it down, without all the jargon. That's what people need here, not a master's thesis....

It'll make your starts worse. It may be working, but it isn't recommended. It can cause hose leaks.