Search:

Does Everlast offer a pencil type 9 series tig torch

Wish you had a sale on repairs

Yes it is out of warranty, I am guessing less than 7or 8 hours of use. I am going to just buy a cheap throw away unit to have around when i need it. I was hoping it had some value but it looks like...

Supercut 50P for sale, Over current light came on while cutting . Checked a few things called tech .I AM Tired of messing with it $150 takes it.
Basehor Ks.

Not sure if it is worth the trouble, $35.00 for shipping to your tech center, $35.00 Back to me , plus $150-300 for the repair I just don't think the machine is worth spending $150-300 on it plus...

have not been on here for a while, Decided to use the 50P today to cut the end off a 48" round tank 3/8" material. stopped several times during the cut and the last time no spark trap was clean as i...

I replaced the rear quarters with ones from other cars, Welded up over 250 trim holes. Tig welded all the aluminum engine brackets as i built serpentine drive for the 6 cyl engine. The hood was...

1349913500Here was my 18 month project, My Everlast plasma and 200Dx were involved in this project.1349713498

It will stay in the Family, I have owned this car since 1971 , it was a street for the first time in 1974. Hope to have it on the road in June this year.

A little more dash area , Engine during setup, and final .129801298112982

A little progress on the build, Glass Engine ect.129771297812979

Now for interior, just set the buckets in last night and did a test run for comfort. My 200DX played a major role in this build...

I spent 2 days in the paint booth this weekend, Everything came out great.1230412305

Correct thus not creating a true 240 volt power source, and not frying your power supply and other things.

Your RV plug is for 120 volts only if you have a 4 wire RV plug it is still 120 volts, unless you have changed some things.Most 4 prong RV twist lock connectors are marine connectors which have an...

Same problem here with pictures, i also could not login for 2 days and now i can. ????????????????

Got the hood shaved and both halves welded together, had to modify the fenders as they were off a Deluxe model . Welded up the trim holes and did some patch panel metal repair also. I Will go over...

Pretty neat Rock Crawler, It has 1.7L VW Diesel hooked up to a 700R4 GM trans and a Rockwell transfer case, A couple of the neat things he does is the wheelbase and the shocks on the corners. The...

The front fit too easy , the alignment hole in the jag front that set the wheel base at the plant fit the chevy. There were 8 holes in each side of the chevy's frame to hold the old suspension. The...

World Class T5 5 speed also, But still going to use the old 6 Cyl that was race built in the early 70's.

Spent some time in Arizona this winter with a good friend from Nebraska, He Stays all winter and goes all over the southwest rock crawling. This waterfall at the end of a canyon had never been...

Been a while since i posted any pics of my old chevy, Floors repaired croosmembers replaced all the quarters and doors have been repaired. New front suspension from 85 Jaguar XJ6, GM 10 Bolt with...

I did not get a PM message , the last 10 boxes was 5/32" and was shipped to South America .

As of last Friday there is no Messer Rod left it has all been sold.

I will try to delete the ad.

I have used mine stick welding with a lot of different rods, Some rods require oven storage and some do not !, your situation is a common one that i have seen for years moisture from humidity or...

Yes my experience with grinding disc's flap wheels ect is the amount of foreign matter they leave on the material, Next to a Stainless steel brush the carbide tool is the best way i have found to...

I try to use a carbide deburing tool on a die grinder if possible, if not i use a clean file to smooth things up. Jig saws and band saw blades tend to leave unwanted dirt and debri in the area where...