Search:

Snowdaze,,you misunderstood me,,,I don't need a reward for doing the right thing,,,as far as a baseball bat and shotgun goes..,that sounds so American,,,I have my own ways of extracting justice on...

I am in your area and will look out for it,,,but I think I have a better chance of winning the lotto than running across it....been ripped off out of my garage and it really ticks me off,,,got to the...

This subject has been kicked around a number of times,,,myself I have used a PA200 and an Imig 205 with my genset...you have an Imig 205 and it will do pretty good stick...for light portability and...

HI Mark...yes arc force can be realy important,,,,however I find that not playing with it until you have the basic voltage and wire speed dial in,,,is the best way to start...once you have that...

Voltage is the most important setting for the thickness of the metal,,,Amps which is wire speed comes next,,,,once you have your voltage set,,then you dial in your wire speed to prevent burn...

Your voltage is too low at 17.9 volts,,,,the voltage for 3/16 is 19 - 22 volts and CFH @ 20 - 25,,,at least that's according to mig spec's using .035 wire..

A thing of Beauty to be sure, nice compact design,,,you have to feel good about something like that,,,almost as good a feeling as having sex with a super model on your birth day (old fart dreaming...

I'm lucky enough to have two Imig 205 and one spool gun,,,personally if I had to choose one welder ,,,mig,,tig,,or stick,,I would choose the I mig 205,,,,does great mig and good stick,,,it's all a...

I am going to take a wild ### guess and say it is a large wire wound resistor,,,,very similar to the ballast resistor you would have mounted on the fire wall of older cars...when they blow that makes...

Yes more hammers than THOR,,he is the the guy I wish I was when it comes to making things,,,always a person to learn from

Your work is always the best,,,nice to see you posting again...

The main difference between 7018 & 6011 is the arc length,,,7018 is a drag type rod,,short arc distance 1/8 or less,,6011 is a long arc length rod 1/8 to 1/4 inch,,,using arc force on a 6011 rod will...

I forgot to mention that standard cup size of 7 would be 7L/min and diffuser cup would be 1/2 of that... say 4L/min...quite a bit lower than your current setting of 10L/min....check CK world tech...

Try turning down the argon,,,cup size and Litres/min are about same...

Not to argue about arc force control and it's effects in conjuction with amps,,,to me...there are 3 kinds of keyhole on up hill welding,,,the first being a slit trench with indications of a keyhole...

that is a bit low on the amps,,,which means that you were traveling too slow to begin with,,,lowering the amps to get better results is not the answer but it does show what the problem is,,,,as you...

You have a brand new pedal,,,,foot pedals get dropped, wear out , driven over in the shop and destroyed through rough use,,,getting an ssc pedal as a replacement is something else,,,if you have an...

I guess I'm your first responder,,,reason nobody else has responded is,,this project is every home owners nightmare,,,many are wondering if they have the same problem,,,I cannot even guess at what...

Regardless of what type of welding you try with a 120 volt welder,,,tig or stick or mig,,,you will not get the proper results unless you have it on a 20 amp breaker or a 25 amp breaker for 120...

Welcome to the group,,have to admit some manuals..seem like they were translated by a guy speaking with a mouth full of marbles to some one typing it in...best to down load newer versions and hope...

A wounderful example of that old saying "one persons trash is another persons treasure",,,good way to start off the new year.

Back in olden days when the flat head Ford engine was hi-tech, they had an add on filter canister available that used toilet paper,,,everybody was cheap in those days, so they used it,,,problem was...

To keep it simple,,,Inrush means current draw while powering up the capacitors,,once they are charged the draw on the line is reduced to operating only..

the larger units like the 250EX require breakers above 30 amps 240 volts,,,,this means you need larger power units in the 10 to 15 thousand range as performance has stated,,,regardless of brand the...

26 volts according to the Spec sheet/manual