Search:

I have run a 7014 1/8" and have no problems but that was running it on 220. On 110 I have used a 3/32 7018 that worked good as well. This is a great little machine but I would say that running 1/8"...

I'm very interested in seeing one of these 160's with the HF start. How much are we talking to get one of these?

I tig welded a little bit tonight with it. Works real good. So far I'm very pleased. Any chance of ever coming out with a unit like this with a foot pedal?

I'm from central IL about 1 hour south of Chicago. I guess welding is a hobby for me because I have a full time job as well. I do a lot of side work designing, welding, and cutting out parts on my...

Yes I love messing with cub cadets. I have 8 cubs total. Yes I did end up fishplating the frame.

How long are the leads that come with the power arc 200?

Are there any plans in the future to make a machine like the 140 with a foot pedal option? Or even the 160? This is a great little unit and a foot pedal would make it even better.

Ok, so the next step was to add in the new frame rails.Then we moved on to the drive shaft. It had to be lengthened 3 feet as well. I used a piece of 3/4" cr and turned the ends down to 5/8" to fit...

This 105 cub cadet is about to get transformed into a dump truck. I started out by stripping it down to the frame so that I could split it and add 3 feet in the middle. The section that was added was...

The Bucket is 42" wide and 16" tall. The hoe can dig 5 feet deep and can reach about 8 feet. The engine is a 12 hp kohler and the hydraulic pump puts out 8 gpm at 3,000 psi. I have this regulated...

Here we have some pictures right after everything was sanblasted and painted. One of the biggest challages with this project was to get everything to fit on this tractor and to keep it looking as...

This is a picture of the subframe for the backhoe. This attached to the tractor with 8 mounting points.

Here is some pictures on how I did the power steering. I had to add a mount to the frame and modify the original steering bracket.

This pictrues shows the hydraulic tank and shows how I mounted the pump to the front of the motor. I wanted everything to fit under the hood when it was finished.

Here is a few pictures right before It was tore down to get sandblasted and painted.

Here is a cub cadet 1250 that I added a backhoe and a loader to. This project took me about 3 years to complete mainly due to time and money. All the hydraulics were purchased new. Every pivot point...

Well I broke down and purchased my first everlast welder. I bought the power arc 140. It arrived with no damage and a day earlier than expected. This is a very nice little unit that welds very great...

I would like to enter the contest.
Current post count 0 (I just registered)