Search:

Very nice ... great detail!

Very cool! Last year I only made a few bikes myself and only one was detailed ... I don't remember if I uploaded it or not it's called "Stray Cat" because the cylinders are Caterpillar bolts.

Didn't know that ... ganna have to try it ... I've had good luck w/ Radnor P/N 64001586.

It's strictly TIG rod as far as I know ... I'll have to look the # up when I get out to the shop ... I picked it up at Air-Gas ... I find 26 amps DCEN for 22ga mild steel is perfect and 58 amps for...

It took several days and a lot of material ... since it was done with a lot of small pieces I held with one hand while attaching I used my MIG that allowed me t keep the weight done however I have...

oh gee I've been around ... lurking in dark places hehe ...
Chicago electric, Central pneumatic, Pittsburgh Tools are fair ... I've been using them for sometime ... anything from Drill Master is...

I snapped a shot and loaded it to my computer so I could up load 11957

I'm using a double burner open hearth forge ... I don't have any pics on this computer but if you go to my winkyenterprises page on face book you can find some ... forging just takes a little...

Hi Dave ... I've been doing some wrought iron gates and fence panels and stuff to sell at motorcycle runs and drag races; The kind of stuff I've been making all along and I've been forging blades out...

Over the last half year I’ve been doing mostly MIG … today I spent a couple hours just running practice TIG beads on SS and mild steel … did some filler, lap and T joints … with my 200DX I...

11466 11467 Been off the "day job" for about half a year ... stressed out can't work for the man anymore ... (PTSD issues) so I've fabricating to try to bring in some survival money here as a couple...

I like that ... I need t make a holder too ... my store bought one broke and I don't weld plastic.

Not sure what was going on but I was denied access myself for a while???

11361 Finally I was able t upload this ... Finished it today it's a heavy duty pedestrian gate made from a Harley wheel I've painted it since the pic was taken ... looks pretty good now ...11362 ...

Been trying to post a pic of a gate I just made but it isn't uploading. aaaagghhh! denied access to my profile . setting etc???????

Nice job ... looks like it will work well.

Your cart looks very cool ... nice job!

Thought it was better than an eye patch or empty socket ... they want way too much money for a plastic one ... four figures ... ouch!

Thought about that ... no room for the battery lol

The weight doesn't bother me ... I should have used 316 but I didn't have any ... not sure what grade stainless it is ... I don't wear it for very long at a time.

11253 After watching Jodie I was inspired to make this ... oh BTW I made a cheesy video about it too. http://youtu.be/qYJfN6O7nv4 Yes,:O that is a SS prosthetic eye I made that I'm wearing in the...

I found a piece of 1/8" plate and put it on top of an old workmate table then attached a vise with another plate w/ a 90 degree angle that I set in the vise for smaller work pieces then I put painted...

Just go out into the shop start rummaging through scraps and see what fits together ... it's a skill you will develop as you do it.

Benvenuto nel forum ... Ho visto il tuo video ... molto buono.

Welcome to the forum ... can't wait to see what you build ... feel free to post pics.