sharing my knowledge lol . a easy way to make metal like new and remove rust
Printable View
sharing my knowledge lol . a easy way to make metal like new and remove rust
You will love this... Easy way to remove rust. Off garden tools and easily loosen rusted bolts. Just let them sit for a while.Quote:
Originally Posted by Rodsmachineshop
I thought this was crazy until I did some reading on it on the net. Lot of info out there on it. This guy built a tank large enough for big car parts. Like the frame.
http://www.stovebolt.com/techtips/ru...t_molasses.htm
I've heard of using Coke to remove rust before, but molasses is a new one to me. Anyone tried the cola approach?Quote:
Originally Posted by Brian Ski
Cheers
Mike
reverse electrolysis works better just need washing soda and a battery charger . throw the rust piece in a plastic tub fill with water add some washing soda . hook negative charger lead to part to derust and positive on a chunk of metal , turn on charger at 10 amps removes every bit of rust . . just make sure chunk of metal dont touch part cleaning. its call reverse de-plating http://antique-engines.com/electrol.asp have a cylinder head soaking rite now doing this since rusted solid and cam locked up in head from rust
What is washing soda???? Ah... See it at your link...Quote:
Originally Posted by Rodsmachineshop
its like baking soda but stronger safe to use . Attachment 6960 you can get it at your local super markets . I use it for getting whites clean when washing close safer than bleach on whites
So where else in the Internet can you learn vital welding skills, use molasses and get your whites whiter! :DQuote:
Originally Posted by Rodsmachineshop
Great tips everyone.
I've never used reverse electrolysis before. Have never felt easy putting charged wires into water. ;) I should try it, though. Will get the rust out of the areas that are hard to get to otherwise.
phosphoric acid works very well
yes but not safe and acid can damage aluminum
What do you set your arc force to? .... Oh, wait, you said charger ... Forget I said anything ;). Great link, thanks Rod.Quote:
Originally Posted by Rodsmachineshop
Cheers
Mike
Washing soda is sodium carbonate, baking soda is sodium bicarbonate. Washing soda can be found in market among the household cleaners and laundry detergents. It is more caustic (has a higher pH) than baking soda and is pretty aggressive. However I prefer phosphoric acid if you can get it. Driveway cleaners made for removing rust stains from concrete contain phosphoric acid. So does Naval Jelly. Best if you can heat it while derusting. It leaves a flat gray-ish colored iron phosphate deposit that is a good surface for accepting a primer coat if you want to paint over it.
Attachment 6962with engines i don't like acids since also removes metal , just like crankshafts put it in acid and its junk . i just want to remove rust not metal and workes good to clean aluminum . put aluminum in acid and see what happens . also good for cleaning metal before powder coating. I have a hot caustic tank at my machine shop just for heck of it put a aluminum intake in it 1 hour later intake was no were in tank ate it up lol
Yes, phosphoric acid is definitely not for aluminum, just rusted steel or iron. The acid reacts with the iron oxide rust and once there's no more rust it won't go any further. The reaction stops. It's ok for derusting engine blocks, but you'd never put a milled surface in it. It would still leave an iron phosphate coating which is not what you would want on the polished surface of a crankshaft or camshaft journal.
Guess you don't want to be mistaking it for the wash basin to wash your face at the end of a hot day! ;)Quote:
Originally Posted by Rodsmachineshop
lol i have got battery acid in my eyes it hurt like hell thank god a friend was near by to wash my eyes out and dump baking soda all over me and rinse me off , still had to go to the doctor and wear eye patches with a nasty salve in my eyes for about a week, had a battery with the caps off was setting on ground and slip out of my hands hit the ground and acid got a face full of acid
Not sure if it would have helped me if I was in your shoes at that time but sometimes I'm really, really glad I wear prescription glasses. Sometimes my head isn't thinking as much about safety as I should be and man, good thing I've got something between my eyes and thing I'm working on! ;)Quote:
Originally Posted by Rodsmachineshop
You were very lucky. Obviously you were meant to go on to see and make more things and to melt more metal.
lol i wear prescription glass's had my glass on but still got me. my glass's have saved me a lot of times -bet your glass's are like mine pitted and scratched from abuse lol . when ever i mess with battery s now i wear a full face shield. something funny most the time i get my glass from walmart since have a guarantee took a pear to walmart and the lady looked at the bent up chopped up glass's she ask what happened to them , i ask there warranted rite yes but have to know how did they get all messed up , told her was bending over a engine and fell of my face and took a trip through the radiator fan she laughed lol she put them on the wall for customers to show how they stand behind the glass warranty
Must have been quite a splash. Wow. Very lucky indeed.Quote:
Originally Posted by Rodsmachineshop
You've got that right! LOLQuote:
Originally Posted by Rodsmachineshop
LOL, tooooo funny! :DQuote:
Originally Posted by Rodsmachineshop
Duddde, that's awesome. Is it ever done on large parts, like car frames or something?Quote:
Originally Posted by Rodsmachineshop
Parts recovered from the Titanic and Monitor have been cleaned with this method. Seen it being done. One was a Dahlgren cannon, substantially larger than a car. S/F.....Ken MQuote:
Originally Posted by ncsugrad2006
Ya mine are pretty scratched up too... Saved me a few times. BTW years ago I flipped a small tractor. Took a good splash of gasoline in the face. No fire thank God. You can get the stuff on your hands with no problem but wow in your face stings pretty fierce.Quote:
Originally Posted by Rodsmachineshop
Cool.. I had never heard of it for some reasonQuote:
Originally Posted by EchoSixMike