Printable View
Here are some pics of my truck model I've been working on for over a year, it's about 18" long. Somewhere's around 400 hours into it so far.
Start of the frame with a 4 link on the rear.
http://album.hybridz.org/data/500/medium/DSCF01251.jpg
coilovers
http://album.hybridz.org/data/500/medium/DSCF0161.jpg
dropped axle and 4 link on the front....and the spring pack.
http://album.hybridz.org/data/500/me..._066_small.jpg
A little more work on the engiine
http://album.hybridz.org/data/500/metal_truck_2_001.jpg
A little more work on the engine
http://album.hybridz.org/data/500/me..._014_small.jpg
aluminum valve covers and the start of a tranny
http://album.hybridz.org/data/500/DS...ead1_small.JPG
Engine and trans in place
http://album.hybridz.org/data/500/DS..._cab_small.JPG
Beginning of the cab
http://album.hybridz.org/data/500/DS..._cab_small.JPG
box
http://album.hybridz.org/data/500/DS..._box_small.JPG
more work on the rear fenders and box
http://album.hybridz.org/data/500/DS...box3_small.JPG
sandblaster the cab after fixing the visor and built a rad
http://album.hybridz.org/data/500/me...eb22_small.jpg
Running boards and front fenders
http://album.hybridz.org/data/500/me...2_rb_small.jpg
headers and headlights
http://album.hybridz.org/data/500/me...ader_small.jpg
floor pan and the beginning of the seats (that's a mini welder in back)
http://album.hybridz.org/data/500/me..._003_small.jpg
Doors cut out, progress on the seats, steering wheel and shifter
http://album.hybridz.org/data/500/truck_interior1.JPG
completed seat
http://album.hybridz.org/data/500/me..._008_small.jpg
front coilovers and steering link
http://album.hybridz.org/data/500/re...013_small_.jpg
coolant tank
http://album.hybridz.org/data/500/Me...close_up_2.jpg
starting to look like something
http://album.hybridz.org/data/500/Me...shot_small.jpg
Exhaust, mufflers and driveshaft on
http://album.hybridz.org/data/500/Me..._botton003.jpg
nerf bars and wooden box started
http://album.hybridz.org/data/500/Me..._rear_shot.jpg
3 coats of gun bluing, tires painted with truck bed liner
http://album.hybridz.org/data/500/tr..._side_shot.jpg
made a distributor, wired the negine and painted the block
http://album.hybridz.org/data/500/Me..._side_shot.jpg
leather interior and wood dash
http://album.hybridz.org/data/500/Me...h_interior.jpg
the red goop is leather treatment that faded away
http://album.hybridz.org/data/500/Me..._map_pouch.jpg
this is what it looks like today, almost finished.
http://microzone.us/weldgallery/d/29...e+top+view.jpg
A more detailed post with more pics is at this address. Any questions feel free to ask.
http://weldingweb.com/showthread.php?t=18000
Finished up the light, here's the pics.
http://microzone.us/weldgallery/d/35...3+smalljpg.jpg
http://microzone.us/weldgallery/d/35...+002+small.jpg
http://microzone.us/weldgallery/d/35...+001+small.jpg
A buddy sent me this Miller Welder piggy bank, so I built a trailer....more pics
http://microzone.us/weldgallery/d/38...ailer+only.jpg
http://microzone.us/weldgallery/d/38...+side+shot.jpg
Any ???'s feel free to ask
Every time I see that truck, I see something I didn't see before. Very detailed.
That's great. Do you machine some of the parts or "hand" fab them? I love the details.
I have a 3 in 1 (mill/drill/lathe) in my garage that I machined the wheels, tank and a few other things with.
I have always wanted to get a 3 in 1, but never had the money and opportunity line up.
That is detail for sure.
Stan, what is the brand in the 3-in-1, want to go look at it. Sounds like a hand tool I will have no room for.
I picked it up at House of Tools, they went bankrupt a few months ago. Brand name is "Force" I believe the same machine sells under different names (China made). Here's a pic.
http://album.hybridz.org/data/500/3i..._001_small.jpg
Very nice work! You could almost do a full size vehicle in 400 hrs.
Nice set up. I have a full size mill and lathe but have thought of getting one of those to do the little parts on. My lathe is some times too big for the parts you need to make on the "end of your nose" if you know what I mean.
Wayne
Wicked cool! That must have taken a fair bit of time!
SWells, nice progression pictures and great work!
I'll bet there are not very many people that have your patience and desire to build from scratch...
:)
SWells, There may be people with patience and desire, but to create what you did takes an real artist. You are one in every sense of the word. My hat is off to you.