Testing Final version of PowerTig 255 EXT

Quote:

---

Originally Posted by Titan winch

http://m.youtube.com/watch?v=b92x0GRwjxU

I was not happy with the initial settings for the easy start menu for both AC and DC . Here we finally had the programming so the finish weld time and downslope works smoothly and consistently down to 5 amps for AC and the 3 amp finish for DC
Cheers
Duncan

---

And for those of us not on mobile devices:
http://www.youtube.com/watch?v=b92x0GRwjxU

Everlast team: This machine looks like its going to be a huge winner for you. It was very welcoming to find this thread after that last one fell off in March. I am anxious to see how this welder turns out as it looks very impressive and promising, accessories included.

any new updates on a release date?

Quote:

---

Originally Posted by damilfman

any new updates on a release date?

---

No updates as of yet. You need to understand that we still need to have the units flown into the USA with all accesories and then further testing needs to be done .
Giving a update without any of this being accomplished would be a little hasty .
We have really only taken the first step in verifying and changing some specs to our criteria , and verifying certain performance aspects. The actual evaluation takes longer than just a week or so and it needs to be done here with a few different sources testing the machines .
But having said this I would expect a somewhat speedy result ,but I can not give time frames.
Cheers

Quote:

---

Originally Posted by Titan winch

No updates as of yet. You need to understand that we still need to have the units flown into the USA with all accesories and then further testing needs to be done .
Giving a update without any of this being accomplished would be a little hasty .
We have really only taken the first step in verifying and changing some specs to our criteria , and verifying certain performance aspects. The actual evaluation takes longer than just a week or so and it needs to be done here with a few different sources testing the machines .
But having said this I would expect a somewhat speedy result ,but I can not give time frames.
Cheers

---

no problem... I didn't mean to be pushy. Myself as well as others are patiently waiting in excitement for this unit to hit the market :)

Question on the new PowerTig 255EXT I was reading the spec. sheets and it has Advance Pulse (AC to DC-) Frequency 0.1 to 10Hz, how does that actually work on the 255EXT?

Same as it does on the 210ext. We've got a video of it (210) up on our channel on youtube.

Quote:

---

Originally Posted by performance

Same as it does on the 210ext. We've got a video of it (210) up on our channel on youtube.

---

Thanks Mark I watched the video on the Standard Pulse and the Advance Pulse on the 210EXT now I understand the AC to DC- Frequency so on the 255EXT AC wave form dose it work on all of them Advance square, Soft square, Triangular and Sine wave?

Wave form shouldn't be affected by the pulse. Two different things.

a new pedal ? anything like the ssc pedal?

Any updates? Haven't heard anything in a while.

Quote:

---

Originally Posted by Gwaltnak

Any updates? Haven't heard anything in a while.

---

I am wondering the same thing.

Any new updates on the Powertig255EXT or the manual for it?

Quote:

---

Originally Posted by Gwaltnak

Any updates? Haven't heard anything in a while.

---

+1 This is the welder I am waiting for before I place my order.

Quote:

---

Originally Posted by zippitta

+1 This is the welder I am waiting for before I place my order.

---

You could always pre-order it. I pre-ordered my PP256 and now this 255EXT.

Everlast,
Is there an online PDF of the 255EXT manual that I can get. I am looking at ordering a 255EXT but would like to look through the manual first.
This model appears to have been out for a bit now, have all of the bugs been sorted out ?
Looks like an awesome little Tig welder.
Thanks
Dave

Quote:

---

Originally Posted by davet

Everlast,
Is there an online PDF of the 255EXT manual that I can get. I am looking at ordering a 255EXT but would like to look through the manual first.
This model appears to have been out for a bit now, have all of the bugs been sorted out ?
Looks like an awesome little Tig welder.
Thanks
Dave

---

You can find it on the manuals page, or here is a direct link.

http://www.everlastgenerators.com/si...TIG-255ext.pdf

Quote:

---

Originally Posted by Rambozo

You can find it on the manuals page, or here is a direct link.

http://www.everlastgenerators.com/si...TIG-255ext.pdf

---

There should be a brochure on the details page along with all the specs and information we have. We also have a video online. All of it should detail about anything you could want.