Add me in.
Looking forward to being active on the site.
This would be #3 so far.
Add me in.
Looking forward to being active on the site.
This would be #3 so far.
Count me in! Starting post #4. This should be fun.
I am entering with 0 posts. (first post right now!) :)
Ill enter. My starting count is 361. I have already "liked/subscribed" to everlast on social media for the previous contests.
I could have swore I entered the winter contest somewhere on the first page but I don't see my post at all. So I guess here is my entry with 44 posts
New user, registering just for this contest. Starting with 1 post!
Good luck. I registered day one and am finding that 100 posts is a lot more than I initially thought, so stick with it if you want a shot.
If you stay active daily, it really is not that bad. Some will often spam to get posts which is against rules and makes it less enjoyable to the rest of us. Starting this late might be an issue though. I am pretty sure it has been done though.Quote:
Originally Posted by agent4573
Eh - I'm not necessarily too worried about the contest, but figured I might as well toss my hat into the ring as long as I was buying a new Everlast welder and registering for the forum. I don't have an extensive background in welding, and I'm sure I'll have plenty of questions as I get going. If I don't get to 100, I won't exactly be heartbroken!
There will be other contests ... this is the place to be if you are new to welding it’s a huge knowledge base with a lot of creative, skilled people. Another great site is www.weldingtipsandtricks.com
From the contest rules in the first post...
Quote:
PLEASE KEEP THIS THREAD FOR ENTRIES ONLY. IF YOU HAVE QUESTIONS, COMMENTS, DISCUSSIONS OR PROBLEMS, POST IN A SEPARATE THREAD THAT WILL BE OPENED OR PM ONE OF THE FORUM ADMINS OR MODERATORS. PLEASE DO NOT USE THIS THREAD FOR GENERAL DISCUSSION. COMMENTS OR POSTS OUTSIDE OF THE ENTRY WILL LIKELY BE DELETED, AND THOSE POSTS WILL NOT BE COUNTED.
I'll give it a whirl:) I have to think up a project ASAP....but have some ideas:) my post count is at 5 or 6 I think
enter me in to the contest guess this is post 1
i dont have a welder/ plasma cutter yet
but iam building a smoker from a piece of 24 inch pipe with 3/8th wall i got for almost free i have welded in past but its been years
i found everlast from looking on ebay for the 3 in 1 plasma cutter welders and reading more on here seems like a great product line
Before I forget to do this..... Start post count was 910..... Ending post count is 1028
My projects for the contest:
#1 http://www.everlastgenerators.com/fo...y-Welding-Cart
#2 http://www.everlastgenerators.com/fo...tive-Metal-Art
#3 http://www.everlastgenerators.com/fo...Welding-Repair
#4 http://www.everlastgenerators.com/fo...d-improvements
#5 http://www.everlastgenerators.com/fo...f-road-Welding
100 additional posts + 5 projects = 6 entries
Think I’ll go ahead and make my final contest post as well … would hate to miss out because I forgot to do this … starting post 432 ending post 566
http://www.everlastgenerators.com/fo...gory-metal-art
http://www.everlastgenerators.com/fo...Category-tools ( see on pg2}
http://www.everlastgenerators.com/fo...-Shop-Security
Somehow two of my projects got mixed into the same thread to view project #2 you will have to go to the second page of it (The little steel bender that is used with a vice is project #2 not the security bars) ... it seems that project three appears on the first page of that one ????
I have liked on facebook from previous contests and shared during this one that gives me a total of 5 entries.
Don’t know if this will count but I’ve also shared on Twitter too.
1 entry for adding 100 posts, 1 entry per project including facebook like and 2 entrys per video (3 max and featuring an everlast machine) for a maximum of 12 entries. When in doubt refer to ☛http://www.everlastgenerators.com/fo...9540#post39540
Please follow the format in post #54 to make it easy on the tally man. Thanks
The contest rules at the top of this thread say:
Did I misinterpret that? Or do only NEW Facebook likes count?Quote:
8) Like us on any social media.
Winky, didn't you do some videos, too?Quote:
Originally Posted by Winky
Yes, I did but the only ones where I'm shown using an Everlast product were made prior to the contest ... that will change in the next contest lol thanks for asking ;-)Quote:
Originally Posted by Rambozo
I'm editing this post because I just realized I should have sent this as a PM sorry ... I do realize this thread is for contest only ... my bad.
I'm too late for this one since i won't be getting my new welder until around the 28th. Will you guys be starting a new contest shortly after this one is done?
Sorry let me clarifyQuote:
Originally Posted by Winky
Starting post 432 ending post 566
My projects for the contest
#1 http://www.everlastgenerators.com/fo...gory-metal-art
#2 http://www.everlastgenerators.com/fo...Category-tools
#3 http://www.everlastgenerators.com/fo...-Shop-Security
1 video http://youtu.be/2N01D3rbgwA
100 additional posts + 3 projects + 1 video + facebook like = 7 entries
hard to do a project when you dont have welder i was wanting to get that 20% off on everlast products ...oh well
Start post count was 601..... Ending post count is 725
My projects for the contest:
#1 Winter-Contest-Project-1-from-Sportbiket-Category-General-Welding-repair
Looks like that is probably going to be the only project I get posted. I have another, but it is not finished yet and it's cold as a mofo outside. My birthday is Tuesday, maybe I'll get something that is welding related and have to run out at the last minute and try it out :D
100 additional posts + 1 projects + Facebook = 3 entries
Got busy recently and only gonna get busier, so I'll summarize early too.
Starting posts: 695
Ending posts: 817
Like on Facebook: 1
...so I'm in for 2.
Good luck, everyone, it's been fun!
Attachment 9563Quote:
Originally Posted by travis
this will be my smoker when done
I may be away from the computer the next few days, and don't want to forget to post this wrap-up before I leave. And since I'm not going to get to my 2nd project before then, I might as well do this now. Hopefully, now that I have my feet under me, my project productivity will increase for next time!
Starting post count was 1, ending is 105.
I completed 1 project for the contest:
1) Winter Contest Project 1 from MuttonHawg. Category: Custom welded Shop tools
100 additional posts + 1 projects + Facebook 'LIKE' = 3 entries
Starting post count = 4
Ending post count = 144
Project 1: http://www.everlastgenerators.com/fo...d-improvements
Project 2: http://www.everlastgenerators.com/fo...-Welding-Table
Project 3: http://www.everlastgenerators.com/fo...ad-Fabrication
Project 4: http://www.everlastgenerators.com/fo...4533#post44533
Video post 1: http://www.everlastgenerators.com/fo...ew-1-Agent4573
100 posts + 4 projects + 1 Video = 7 entries
I really wish I had facebook for those "like" entries. O well.
Starting Post Count: 126
Ending Post Count: 240
Project 1: http://www.everlastgenerators.com/fo...ad-Fabrication
Project 2: http://www.everlastgenerators.com/fo...ded-Shop-tools
Youtube Video 1: http://youtu.be/ySxRpGy7Q7I
Youtube Video 2: http://youtu.be/2Qjh_os62gw
Liked Facebook (Spike Roseman)
Followed on twitter (@SpikeCustoms)
subscribed on YouTube (iAmSimplySPiKE)
does this make 8 entries or 10 entries (does each social media count as 1, or is it just 1 entry total for all social media follows?)
Ill post my current entries at this point also.
Started at post 361 and currently have 467. I have subscribed on Facebook, Twitter and YouTube.
So I have a total of 4 entries.
Quote:
Originally Posted by agent4573
Since I'm an idiot and forgot about youtube, let me add that in...
Starting post count = 4
Ending post count = 144
Project 1: http://www.everlastgenerators.com/fo...d-improvements
Project 2: http://www.everlastgenerators.com/fo...-Welding-Table
Project 3: http://www.everlastgenerators.com/fo...ad-Fabrication
Project 4: http://www.everlastgenerators.com/fo...4533#post44533
Video post 1: http://www.everlastgenerators.com/fo...ew-1-Agent4573
100 posts + 4 projects + 1 Video + Subscribed on Youtube= 8 entries
end of contest post
facebook like =1
Subscription to everlast on youtube =1
didnt make 100 post
i think that makes 2 entrys
I thought the rules were that you needed that 100 posts to even qualify for entry, so if you did not make the 100 posts, you were not in?Quote:
Originally Posted by travis
Less than 100 additional posts means you did not qualify for the contest.Quote:
You will need 100 posts to qualify for entry and will count as 1 entry.
since social media is a category only 1 like would count.Quote:
Only one project per category though to keep it fair, but a project in each category will each count as an entry, good for a total of 5 entries.
Some of the videos may not meet this requirement.Quote:
Post any video featuring an Everlast product either as a review or with a prominent presence
Sorry to be the bad guy but this is from the contest rules. http://www.everlastgenerators.com/fo...9540#post39540
i did read that but if you dont do it all your not in anyhow so what do i have to lose
A forum member would be in @ 1 entry with just the 100 additional posts from the start of the contest.Quote:
Originally Posted by travis
i got started late didnt read it all till a month ago thought i might give it a try its hard to have a project if you dont have a welderQuote:
Originally Posted by zoama585
figgered it worth a try for 20% off
***FINAL POST***
Post Count: Start 1 -- 104 Finish
Project 1 - Welding Cart: http://www.everlastgenerators.com/fo...y-Welding-Cart
Project 2 - On-Road Fabrication: http://www.everlastgenerators.com/fo...ntake-Manifold
Facebook LIKE
1 + 2 + 1 = TOTAL 4 ENTRIES
So I'm really tired right now. I'm working off 4 hour of sleep due to working late in my shop and having to get up real early to unload my order of steel. I'm trying to read all the details of this contest and feel like I'm missing something. Doesn't help that I keep falling asleep while reading it lol.
My question is do I qualify? I don't have 100 posts but I have two current projects posted on the forum and a boat load of videos posted on my youtube channel. I've uploaded 26 videos so far this month alone and plan on posting a few more tomorrow once I start on this next project.
Am I to late? Do I qualify? What do I need to do to jump into this at the last damn minute?
Here are my two current projects:
http://www.everlastgenerators.com/fo...or-Freight-Ram
http://www.everlastgenerators.com/fo...-Welding-Table
Here is the link to my youtube channel:
http://www.youtube.com/UvisionMedia
Hell here is my facebook page that I actively use and post about my tools and projects:
http://www.facebook.com/AlvarezMetalWorks
I need to win one of these. I could sure use a TIG welder to show off.
Didn't get to do much of what I wanted to project wise.... but here are my totals:
Starting post count = 208
Ending post count = 310
Project 1: http://www.everlastgenerators.com/fo...f-road-Welding
100+ posts + 1 project + Subscribed on Youtube (gemrough is my user name) = 3 entries
Good luck guys.
Well looks like I wasn't able to do much this time around. To many things got in the way and plenty of other excuses. Hope the spring/summer contest will hold better for me. Here're my vitals.
Start Post: 8
End Post: 111 (assuming this post counts)
1 Facebook share/like Dec. 2 2012, Followed on Twitter as Tanh, Liked on Youtube
1 Project - Welding Table
For a total of 3 entries.