PP60C CNC port question

Quote:

---

Originally Posted by posixPilot

Sean,

How many pins do you need wired? I would be happy to solder on some cat 5 (8 wires) and send you the coupler I received with my 256 . Just let me know. I think cat 5 would be adequate (gauge) for the application.

Cheers
Mike

---

Thanks I got them fixed up. I started out with 18 gauge wire which is too thick. I got a roll of 20 gauge wire so it would fit inside the holes, and that made it easier, but it is still a pain! I have a cheapo soldering iron, I'm going to invest in a better one.

http://i32.photobucket.com/albums/d2...7-14102326.jpg

Gotta get me one of those helping hands.

Nice to hear you got it complete, Sean.

Brian, absolutely correct. Clean, clean, clean. Took me way too long to learn that - even after being told .... I must have a thick head ...

Quote:

---

Originally Posted by undercut

Brian, absolutely correct. Clean, clean, clean. Took me way too long to learn that - even after being told .... I must have a thick head ...

---

The trouble I always have had is if you have old copper... A cable that may have gotten damp. The copper is black so you clean it with sand paper until nice and shiny... Still has trouble getting the solder to stick. Have to clean the stuffing out of it...

Quote:

---

Originally Posted by Brian Ski

The trouble I always have had is if you have old copper... A cable that may have gotten damp. The copper is black so you clean it with sand paper until nice and shiny... Still has trouble getting the solder to stick. Have to clean the stuffing out of it...

---

I suspect that is why I always tin my wire before trying to solder it in. Better to find out when tinning than melting everything into a mess at the final joint.