When should we coordinate the shipment of our 250ext welders back to you for replacement?
Printable View
When should we coordinate the shipment of our 250ext welders back to you for replacement?
They'll be rounded up systematically, of those still left out there... Oleg's words were that this shouldn't be a worry for customers of the 250ext (old).
Don't you mean 250EXT (Classic)? ;)Quote:
Originally Posted by performance
Looking forward to getting mine :)
Sounds like there is a plan to fix the small issues to.
Any more updates?
A quick update from here, as I am off to get to work.
I've really only done a couple small aluminum projects. On steel, perfect. No start issues I can see. It's lot like the 210EXT, smooth starts.
I have not ran any real high amps with it yet (but it has the same driver board/finals as the 250EX so I'm sure that's all good), but I have thick plate for that test if needed. Also, we have not really pushed a lot of aluminum work through it either. Busy, so I just that is a good thing.
Anything anyone wants tested from the old model, if I can do it? Mark has one I believe as well. I know Mark beat it up on the low amps start-up for both steel and aluminum.
I just watched the Demo of this welder on youtube and I was really impressed with the smooth low amp arc starts! Smooth as silk! Those digital invert machines are soooo nice!
The units are IN. All should be shipped out by Friday...minus the few things we discussed earlier. They will spot check a few boxes though, so don't panic, if you get one that has been retaped, to see if anything has changed from our earlier determinations about what is missing or changed.
PLEASE, contact Oleg today though and reconfirm shipping addresses etc before he ships. We know some of the shipping addresses have changed.
We'll be rounding up the remaining old units of the 250exts shortly.
Alright !!! :D
That's real good news, can't wait to light up!
Now Waiting on the Stoop in Kent
Jim
The timing of this couldn't be more perfect. Earlier would have helped but it is still going to arrive just in time for my needs. :)
I want my...... I want my E X T..... :)
Taking your reference one more step...
we gotta weld aluminum castings
copper tubing, magnesium
we got to weld these triangle wave forms
We got to weld these stainless turbos
Any up date on the shipping? Anyone receive their 255 EXT yet? I sent a note to Oleg that my address has not changed.Quote:
Originally Posted by performance
Mine will be here tomorrow, according to UPS!!!
Did you receive a shipping notice? I have not heard anything on my end.Quote:
Originally Posted by Gwaltnak
Why not call oleg and ask him about your shipment?Quote:
Originally Posted by DVA
I called and spoke to Alex. When it shipped, I got a notification via email. Says it will be here today.
Looks like they are getting out to everyone. Guys, hang in there, it will be worth the wait.
Used it today testing with it, to do a number of products for a customer.
I has a lot of features, and thank God I can save the settings. Setting #5 is for this one.
Attachment 10948
Attachment 10949
This is a nice update to watch while waiting for them to arrive. Thanks to Tim, well done. (Now I know where my machine has been!) Jim
http://www.youtube.com/watch?feature...&v=bkuXKsls3e8
It's finally here folks... Here's a little eye candy for you!
http://img.tapatalk.com/d/13/10/12/unasysa6.jpghttp://img.tapatalk.com/d/13/10/12/ajehatun.jpghttp://img.tapatalk.com/d/13/10/12/gu9ede5u.jpghttp://img.tapatalk.com/d/13/10/12/6ejy5ume.jpghttp://img.tapatalk.com/d/13/10/12/hejujy6u.jpghttp://img.tapatalk.com/d/13/10/12/gada3esa.jpghttp://img.tapatalk.com/d/13/10/12/hy9uqahy.jpghttp://img.tapatalk.com/d/13/10/12/vugu8u8y.jpghttp://img.tapatalk.com/d/13/10/12/beru2yvy.jpghttp://img.tapatalk.com/d/13/10/12/asu7etuz.jpg