Knoflux

Hey all!Should be getting my 250EX this week! Hopefully with no hitches.

I'm a sheetmetal worker for some 37 years now, most recently in an architectural

shop doing S.S. , copper , brass , bronze , aluminum , and steel custom

fabrication. It's good to see new welders on the forum. Hopefully we can all

learn from each other1

You can teach an old dog new tricks with a big enough stick!

Welcome aboard Knoflux. You will like the 250EX. Great unit.

I like the big stick comment, I was thinking a big electrode when I read it.

Anyway, good to have you, sounds like a lot of experience.

Hello Sans Flux! ..... Your really gonna dig your 250EX! It's a crazy good machine, and rest easy cause even if there is any manner of glitch ( likely not ) you will be taken care of immediately and with 100% satisfaction! You will not find a company that works any harder to make sure you are not only a satisfied customer, but also one that is welding with a seriously top notch piece of equipment.

Since the 70's up until now, Ive used some top shelf machines, and the arc quality of the 250 ranks right up there with the best! Couple that with the shaping features, power/duty cycle, and you have a very serious welder! - Lou