Printable View
Just a quick post too let Everlast know I am very pleased with my new PowerArc 200 inverter I have used this for about a week now and can find no faults! Lots of power for a great price!
including a picture of 1st pass on a fillet weld done today on 1/2" to 1" plate,5/32 7018 at 165 amps EP
Regards Bob
http://www.everlastgenerators.com/fo...1&d=1285111393
wide weave cover 1/8 ,7024 ,140 amp, en
http://www.everlastgenerators.com/fo...1&d=1285181533
I tried to tell people this earlier in some of my posting, now you are showing them, it is a great welder. Very reasonably priced and power to spare.
This might be the next thing I get from them, I like the small package and the price, if they had one in stock when I got my plasma I might have just grabbed one then, I'll have to see, I hate to haul my 250ex all over the place, I hate for it to get damaged. Looks like it welds good, hows it do overhead and vertical up? is the 6010 thing as neat as I am told? my 250 so far has burned those (6010/11) great although it wasn't apparently designed for it.
Doxie
Glad to see your up and running . I still have not had the chance to get out to do a bit of fishing .
I can not really answer the overhead . But i had a Customer in today and he specifically wanted to try out the vertical up weld and after burning a couple of rods in 6011 and 7014 he was very pleased with the performance
cheers
Is this typical of the first pass thickness you can weld with the Power Arc 200?Quote:
Originally Posted by Doxie
to answer your question about over head and v^ all though i dont have a 200 i have the 160. it works perfect and as far as the 6010 port it worked great while doing root's
Davy,
Yes, this is typical, though I'd suggest starting with a smaller rod and a smaller pass. Multiple passes are better.