Printable View
when i looked at the photo online of the power arc 160 it looked small but not that small. when i opened the box today when it got here this thing is really small i like it. as i have still to pop in a new breaker and get a outlet for the plug that came with the welder. can't wait to fire it up and see how well it works
YOTA
DO NOT USE THE PLUG THAT CAME WITH THE WELDER!!!!!
We have cautioned our customers here several times about the plug in the box. If it is in there, throw it away.
USE ONLY A TWISTLOCK 220 PLUG or a NEMA 6-50P
i was wondering why it was in there remember asking if it came with one and was told noQuote:
Originally Posted by performance
this thing is great i love it didn't have any 6010 so i used 6014 arc was perfect although i have to get used to the holder but overall it's a 10
correct me if im wrong here. but is is possible to run a spool gun off of the power arc 160 since it's cc/cv ?
You can probably adapt one and it will work.
BUT there is no on/off switch so the wire will always be hot and you would need power to run the motor in the gun.
I IMIG would be a safer option and it is plug-n-play too.
Just be careful.
Power ARC is NOT CC/CV. Its CC only.
The PowerI-MIG's are, except for the 250P. But not the PowerArc.