256 Initial review

Thought everyone might be interested, its rather lengthy...

http://www.kitcarinfo.com/welder/welder.htm

If you want the short version ....in a nutshell, overall my experience with Everlast and the machine has been very positive.

Thanks for the write up look forward to hearing more of your thoughts as time goes by

Thanks for the write up look forward to hearing more of your thoughts as time goes by

Quote:

---

Originally Posted by haroldmulder

Thanks for the write up look forward to hearing more of your thoughts as time goes by

---

Quote:

---

Originally Posted by 2rods

Thanks for the write up look forward to hearing more of your thoughts as time goes by

---

I was going to say the same thing, but they both said it first! :)

This is the tig I am looking at.

Quote:

---

Originally Posted by Tony_F

Thought everyone might be interested, its rather lengthy...

http://www.kitcarinfo.com/welder/welder.htm

---

Lengthy is one thing , unreadable is another, try posting it as a common .doc file, not everyone has the newer .docx format, especially the XP users.
.DOCX is another microsoft suck off to get us to abandon XP and fill their pockets with our cash.

:rolleyes:

.docx isn't an issue with xp. Its an issue possibly with your version of word. Word 2007 should be fine...which works quite well with xp. I have XP and no problems.

I could repost it with the op's permission

I could not open it either, I still use Office 2003. There is free Microsoft add-on that will allow you to see it with older Word.

Links to viewers and converters are below -- provided free of charge by the Microsoft evil empire.

Viewer

Converter

-t

Welding cart done!

http://www.kitcarinfo.com/welder/welder.htm

Quote:

---

Originally Posted by Tony_F

Welding cart done!

http://www.kitcarinfo.com/welder/welder.htm

---

Tony,

Looks nice. Like the air/gas valve setup. What did you use to sketch it up? Google?

Quote:

---

Originally Posted by everlastsupport

Tony,

Looks nice. Like the air/gas valve setup. What did you use to sketch it up? Google?

---

Hi Mike,

Thanks for the comments. I used Alibre Design A year or so ago, they had a sale on their pro edition - $200 or something like that, so I grabbed it and have been using it ever since. It works well and is easy to use. Alibre has since added a personal edition with less features for 100.

Tony

I finally found a source for the PM256 7 pin connectors on eBay, shipped from China, its 10 dollars and includes the base in addition to the cable plug. He may have just the plug, but I did not see it.

I ordered one a few weeks ago to test fit, it works, so here's the link

http://cgi.ebay.com/ws/eBayISAPI.dll...m=390146071306

Tony

Cool looking cart and love the details, Thanks!!!!!!!!!!!!!