Having trouble with AC on a 225LX

Printable View

10-16-2013, 06:10 PM
El guapo

Having trouble with AC on a 225LX

All has been well for the most part for the first year, welding aluminum has always been a little off though and now the AC performance has taken a complete nosedive. I haven't changed settings other than frequency and it does not matter anyhow it happens from the lowest to the highest. I only use Thoriated or Lanthanated tungsten properly sharpened and cleaned. The arc is EXTREMELY unstable, I even tried using it on pulse and it made no difference. For the first 5 months I had to more or less force the arc and at higher frequency it really started to break up but now it is just un-workable. All of the basics have been checked and I have 2 other machines here ( HTP 221 and a Miller Dynasty 200 ) to compare with. Any ideas? Or should I just send it in??
10-16-2013, 07:33 PM
Kempy

Phone Everlast at Technical Support (1-877 755 9353) or email them at (http://www.everlastgenerators.com/Technical-support.php) see what they have to say first.
10-17-2013, 03:32 AM
performance

Quote:

Originally Posted by El guapo

All has been well for the most part for the first year, welding aluminum has always been a little off though and now the AC performance has taken a complete nosedive. I haven't changed settings other than frequency and it does not matter anyhow it happens from the lowest to the highest. I only use Thoriated or Lanthanated tungsten properly sharpened and cleaned. The arc is EXTREMELY unstable, I even tried using it on pulse and it made no difference. For the first 5 months I had to more or less force the arc and at higher frequency it really started to break up but now it is just un-workable. All of the basics have been checked and I have 2 other machines here ( HTP 221 and a Miller Dynasty 200 ) to compare with. Any ideas? Or should I just send it in??

You have to begin the process by calling in to tech support and going over diagnosis and then receiving a RMA number before it's sent in...otherwise, the unit is put to the bottom of the pile without any authorization, explanation, prediagnosis, or paperwork to hep determine what is wrong.
10-21-2013, 09:26 PM
El guapo

Quote:

Originally Posted by performance

You have to begin the process by calling in to tech support and going over diagnosis and then receiving a RMA number before it's sent in...otherwise, the unit is put to the bottom of the pile without any authorization, explanation, prediagnosis, or paperwork to hep determine what is wrong.

OK I will put in a call ASAP.