gouging parts for trafimet s75 plasma torch , Where to buy?

I went looking for parts to convert my s75 to do gouging and could not find anything. When I purchased my 60S from everlast the salesman said I had to get them from trasfimet. I went to the trasfimet USA web site and the s75 parts schematic did not have them. Does anyone out there know where I can find info and parts for this? I am going to send an e-mail to tranfimet and see what response I get but I was hoping someone has a quick response.
I just went back to the trafimet usa site to send them a message and they want my life history just for me to ask them a question. That is crazy. I hate giving people info when they do not need it. I refuse to do that so I will have to look elsewhere for the info.

The S75 torch has two types of electrodes available from Trafimet USA , first is the type that was supplied with the torch a standard length electrode ,the second is a extended length tip /electrode ( extended tip Pr 0119 Extended Electrode Pd 0018 ) retail is about $5 to $6 per tip / electrode i personally do not like to recommend any of the trafimet torches for gouging although if one where to be used the S75 would be the better choice.
Hope this is the info you are asking about
Cheers

Quote:

---

Originally Posted by Titan winch

The S75 torch has two types of electrodes available from Trafimet USA , first is the type that was supplied with the torch a standard length electrode ,the second is a extended length tip /electrode ( extended tip Pr 0119 Extended Electrode Pd 0018 ) retail is about $5 to $6 per tip / electrode i personally do not like to recommend any of the trafimet torches for gouging although if one where to be used the S75 would be the better choice.
Hope this is the info you are asking about
Cheers

---

I went to trafimet usa schematic again. They do not have a part pd0018 listed. Do you mean pd0118-10 ? If it does not work as well as I need I will only be out a few dollars to try it. Otherwise I am back to carbon arc gouging and I would like to stay away from that if possible.

Quote:

---

Originally Posted by TheGary

I went to trafimet usa schematic again. They do not have a part pd0018 listed. Do you mean pd0118-10 ? If it does not work as well as I need I will only be out a few dollars to try it. Otherwise I am back to carbon arc gouging and I would like to stay away from that if possible.

---

The -10 is a 1.0mm electrode diameter.

http://www.alfahdsteel.com/Files/F_453.pdf

I too am in need of some parts for my s75 torch and they aren't up on the website. Could you please post what parts you have and the prices on here?

Until we get our new website up, you can go to the canadian site and look them up...Same kits and parts..prices aren't much different, good enough to give you an idea.

http://www.everlastwelders.ca/

Quote:

---

Originally Posted by zoama585

http://www.everlastwelders.ca/

---

Thanks, that is exactly what I was looking for.