Printable View
I bought the WP-20F torch last year to replace the Huge torch that came with my 250EX.
Today, the switch has decided to not work but it is stuck in the "on" position, not the actually switch lever but the electronics.
I switched to my pedal and it works fine.
Has anyone had this problem and is there a fix besides buying a new switch?
It may be possible (I have done it with some success) to carefully pry it apart, and clean it. That might start things working again. Do it in a warm room so the plastic won't pop on you.
But honestly any momentary switch like a toggle or rocker switch from Radio shack will work.
How hard is it to cut and splice in a rocker switch?Quote:
Originally Posted by performance
I just threw it to the side because I was busy but I guess I need to dig in a little deeper and take a look at it.
Splice in? No harder than you make cutting two wires, and connecting them together at the switch???? :)
I was thinking there was several wires since it has the connector at the other end with all the pins....
I took the switch apart, pulled out the micro switch inside and pushed it a few times. put it all back together and turn on the welder and it works perfect now!?!? Dirty maybe??
Was there any electrical lubricant in the switch? If so it might have gotten gummed up and taking it apart helped to free up the stickiness.Quote:
Originally Posted by CGCINC
You may like a smaller switch with much less travel... I used a 5mm momentary.
Attachment 8597
That torch is magical. I love it. I just built a whole trailer using TIG.Quote:
Originally Posted by zoama585
No, it was dry. I blew on the switch so I be I cleared some dust or something!?!?? I guess?!?Quote:
Originally Posted by zedron
I'm just glad it works because I don't like the pedal unless I'm welding Aluminum
Strange that dust would do that...?Quote:
Originally Posted by CGCINC
Mmmm. I read that entire thread 3 times, lol. How many switches do you have remaining? I might be adding a switch to whatever torch I decide to get.Quote:
Originally Posted by zoama585
That's what I'm thinkin... lolQuote:
Originally Posted by zedron
At least it started working though
I don't have anymore switches but they only cost about 10 cent each.Quote:
Originally Posted by zedron
Make sure there's not a frayed wire in there shorting the switch. I just had that with mine. Set the torch down and it would fire, or twist it just right.