I-Mig 200 Arrival!

Just last week I purchased the I-Mig 200. I opened up the box and took inventory of what arrived. All was there including a few extra contact tips, hose for gas hookup and clamp, but what was not in the box was the regulator for gas flow. Should that have been included in the package or should that have been ordered extra? I thought that would have been included.

On a different note, I did some field welding with it on a loading dock using a 5,000 watt generator and it worked flawless. It would be better if I had a longer cord on the gun. I was welding ¼” to ¼” and ¼” to 3/8” using .035” Flux core wire. It takes a little practice to get the settings right, but when I did it laid down a half decent looking bead

Next project is a nice custom outdoor fire pit using the scraps from this job.

-Chris

Call the office. That should have been shipped.

Just a reminder, they're on West Coast time so the office won't be open until after noon Eastern. The number is 877-755-WELD (9353).

Thanks guys. I'll try and give them a call a little later.