Project 1 from Bob wills, mean green contest, Potato layover

I welded up this layover disk that my uncle put together that we were gonna use for covering up and later laying our potatoes by and create a little mound for before planting. I welded it all up with our mig. It took maybe an hour or something to weld it but i dropped a part he had tacked and it broke so some of the time was getting it all lined up. We have since put it together and tried it out and it works quite good. We decided that we need to make an attachment that attaches behind it to dig a little ditch perfectly in the middle of it so you can plant strait into the hump. I have pics of all the parts and will put pic of whole thing all put together when get the chance. It has 3 ajustments for how wide of a hump it makes. Picture 4 attaches to the bottom of picture 6. It works great so far and saves a lot of time.
Attachment 6312Attachment 6313Attachment 6310Attachment 6311Attachment 6309Attachment 6308

looks good , its amazing how much stuff breaks when living on a farm . I grew up on the farm in Iowa always repair farming equipment since most are stuff was very old and new farm equipment is expensive