PU205P Plasma Cutter

I have found 2 things in my year or so of ownership.

1. Grind down to bare metal for a ground and this thing cuts like a Jedi Light Saber!
2. At 20 Amps you can get away with just eye protection but at 50 amps that will give you a white raccoon mask around your eyes :O and a very burned face and forehead :mad:. It even can get under your hat since the arc is coming from a low point.

Thurmond

I'm still having trouble with mine running off 120V, but a good ground, small (0.6) orifice in the tip, and dragging it works OK...

Still haven't played with the TIG yet... :(