I have a PP205 (50a plasma) Can anyone recommend a roller guide as well as a radius guide that will fit my torch. Checked the one on everlast site out and looks a bit thin?
Some on ebay, but not sure if they will fit?
Printable View
I have a PP205 (50a plasma) Can anyone recommend a roller guide as well as a radius guide that will fit my torch. Checked the one on everlast site out and looks a bit thin?
Some on ebay, but not sure if they will fit?
I don't think there is a roller guide for the standard torch. There's no flat area for it to sit. (untapered)
Attachment 6123
The Guide in the right of the picture fits your Torch.
The US Office should have these in stock as it is a common part that we carry
Cheers
Duncan
THanks....Do they have a radius guide too?Quote:
Originally Posted by Titan winch
I thought you may have had this torch. Attachment 6124
A roller guide makes a big difference in your cuts. The edge will be much smoother.
Thanks Zoama...The torch that I have is the one that came with the PP205 from Everlast.Quote:
Originally Posted by zoama585
I have an AG-60 torch and bought one of these
http://www.ebay.com/itm/Plasma-cutte...ht_3588wt_1164
my torch looks like this and it fits fine
Attachment 6127
guide
Attachment 6128
ken
The AG-60 has ceramics with a groove so you can use a wire stand-off. Also, river-weld (and all his many river names on ebay) is a good guy to deal with.
Duncan and Jean in Canada (everlastwelders.ca) will always have what you need as well.
I buy a lot from river never had any problems with seller , great prices
Same here, very easy to deal with. He likes to say "top quality, made in China !"... at every opportunity. Attachment 6129Quote:
Originally Posted by Rodsmachineshop
First choice is http://www.weldingcity.com/ but if they don't have the stuff I need, I go to river. (well, sticks and wire I get at LWS)