Project #2 from charger 891 hd welding table
This project is kinda related to my workbench build i did a while ago, with limited space i had to build a table that would fit under my workbench and be able to wheel it under, i also wanted it solid when welding and pounding so i did not want fixed casters, this is my bench, i`ll post up specs later, has 4 boxed tubing welded horisontly to mount tooling , strapping hooks ect, also one boxed tubing insert into one of the table legs for severe pounding, also have a plasma tray that slides underneath the table, originally i was going to build it to slide out and hinge upwards so it would line up with the top of the table but ran out of time so came up with a different mechanism. Basically 2 pieces of boxed tubing, the larger end welded to the table, smaller to the grille frame, and a locking mechamism to hold them together, push them into each other and they lock up, then i build a stabiliser arm to keep the plasma tray equal to the table top (picture for some reason looks like there not even!). For the caster lift i used 2 sections of farm equipment pto shafting, the shafting does not have play like boxed tubing, i then bent up some round rod to make my lift mechanism. so here`s the table, i still want to build a bottom tray for my scrap steel and a few rods for my clamps, all the steel was used stuff i found around except the steel for the grille.
http://i925.photobucket.com/albums/a...1/IMG_1255.jpg
http://i925.photobucket.com/albums/a...1/IMG_1252.jpg
http://i925.photobucket.com/albums/a...1/IMG_1254.jpg
http://i925.photobucket.com/albums/a...1/IMG_1253.jpg
http://i925.photobucket.com/albums/a...1/IMG_1255.jpg
http://i925.photobucket.com/albums/a...IMG_1253-1.jpg
http://i925.photobucket.com/albums/a...1/IMG_0261.jpg
http://i925.photobucket.com/albums/a...1/IMG_0262.jpg
http://i925.photobucket.com/albums/a...1/IMG_0263.jpg
http://i925.photobucket.com/albums/a...1/IMG_0264.jpg
http://i925.photobucket.com/albums/a...1/IMG_0265.jpg
