CK Torch Packages For Everlast Welders

This is an email I got from Sjon Delmore of CK Worldwide...
(for a 25' torch lead just replace the -12- in the part# with -25- )


I have created some TIG Torch packages and remote amperage controls for Everlast machines:


1. Torch Packages:

CK9-12-RSF FX (130A, 12.5ft Superflex cable, flex head)

TL26-12-RSF FX (200A, 12.5ft Superflex cable, flex head)


2. Dinse Adapter:

#SL2-35QD (1/2” Dinse w 12” gas hose quick disconnect for CK9, CK17)

#SL8-35QD (1/2” Dinse w 12” gas hose quick disconnect for CK26, TL26)


3. Remote Amperage Control:

#WACCV-10-1-LG7 (Wheel remote amperage control, 13.5ft for Everlast)

#RACCV-10-1-LG7 (Rotary remote amperage control, 13.5 ft for Everlast)

#AMTCV-10-1-LG7 (Linear remote amperage control, 13.5ft for Everlast)



Kind Regards,

Sjon Delmore


Sjon Delmore CWI/CWE

North American Sales Manager

CK Worldwide, Inc.

3501 "C" St. N.E.

Auburn, WA. 98002


www.ckworldwide.com

800-426-0877

253-350-4241 Cell

sjon@ckworldwide.com

The remote amp control sounds great, that's torch mount, right?

Quote:

---

Originally Posted by Jake98

The remote amp control sounds great, that's torch mount, right?

---

Yes..

http://www.youtube.com/watch?v=CKoMLM7hFRE

That's very cool, thanks for the video! I have to get one of those.. the last one he showed looked like it can't be beat.

How much? I just ordered the ck gas saver lense off ebay for 50

How do we get pricing, email them?

They are not that far from me (driving distance) will see if I can drop in sometime and try out the different torches.

Cheers,

Mike

You could email CK... I just looked up the part numbers that I wanted at www.ckworldwide.com then search for them at Edit: I can't recommend arc-zone anymore due to very poor customer service. I buy local now at a much lower price with no BS. The only CK frontend parts I buy are the wedge collets (the rest is over priced in my opinion) for the other parts (cups/gas lens) I buy generic.

Guys keep in mind, that the I tig 200 and PowerTig 185 use different pots. Also the 200DX is different.

The standard 47k should fit the 225lx and 250ex and the ext.

Going to bump this old thread...

I was given this part number from my lws for a dinse connector as found in this thread:

#SL2-35QD (1/2” Dinse w 12” gas hose quick disconnect for CK9, CK17)



Would this work with a 2013 Powertig 200DX-D?

Just a 200 dx guys. Not sure why canada put that on their site. We didn't assign it a D designation. Its simply a 2013 model 200DX.

It should work.