Printable View
Just got in from vacation and my new 9 pin cable you me was in. I hooked it all up and I have no trigger control, it works without hitting the trigger. It's set to cut all the time but no air after I stop cutting or before. Is it something I'm doing wrong? Mickey
We dont have 9 pin cables on pp 50's. can you explain a little further.?
Hey Mark, my bad, just a new type plug to me. The euro typ. Sorry. As soon as I turn the machine on it will cut without hitting the trigger. I have no trigger control on the gun at all. Maybe it,s me, the setup?
Mark , Should I call tech support Monday about this proglem or is this something you may be able to look into? thanks Mickey
Maye the switch is sticking? Maybe bad contact somewhere?
Where would there be contacts that would cause this?
the PP50 should have the Euro type central connector.
It might be that you have the 60C torch. The trigger is wired differently than the rest.
Give me a call tomarow.
Ray thanks for your time spent. They are shipping me another torch out to me with a return shipping doc for the the one they sent me. Thanks again.Quote:
Originally Posted by trickbiker