Project #1 from EmptyNester - Welding cart (continued)

This is a continuation of this thread, it was my first project for the contest, but I didn't name it right:
http://www.everlastgenerators.com/fo...a-welding-cart

So, I finally decided what to try for the cable hangers. I found a bunch of u-bolts I had laying around, so I welded them onto the side. I also make a wood shelf that I hasn't had in place on the first pictures.

I haven't put the cables on the hanger yet - the paint is still wet on them.

Attachment 3688

In the close-up you can see that I put 3 on the side. Lager ones on either end and a smaller on the middle to hold the torch. I also put a large square u bolt on the back to hold the heavy gauge extension cord.
Attachment 3689