Jericho777 from Wedlingweb

jericho777 http://www.weldingweb.com/images/sta...ser_online.gif
WeldingWeb Apprentice
Join Date: Jul 2009
Location: Massachusetts
Posts: 20


Everlast PowerMaster 205
Well I finally received my POWERMASTER 205 welder. For the second time! I would like to thank Alex for his help and reassurance. The second time because UPS damaged the first one. I was uneasy about buying a welder from somebody whom I did not know. And the problems that could arise. But after dealing with Everlast I have nothing but respect for them. They really were there and stood fully by their product and have a passion for their products. It just took extra time because I’m on the east coast and they are on the west coast. You really have to see the welder for yourself. I‘ve heard the banter about Chinese quality but seeing and using is believing. I considered a comparable USA welder it was about the same price but was only 165 amps had no pulse. no stick and no plasma cutter. I also looked at some other import welders but they did not have the latest IGBT technology. I am by no means an expert on welders or a great welder but I can only tell you about my experience. Here are some pics of my new welder and my first project, shortening my sons shifter. Also filling some holes from a previous MIG job.
Attached Images http://weldingweb.com/attachment.php...1&d=1249770130 http://weldingweb.com/attachment.php...1&d=1249770189 http://weldingweb.com/attachment.php...1&d=1249770226 http://weldingweb.com/attachment.php...1&d=1249770247 http://weldingweb.com/attachment.php...1&d=1249770263