Specter's Cut60D review from WeldingWeb

** http://weldingweb.com/showthread.php?t=27799&page=3 **
specter http://www.weldingweb.com/images/sta...er_offline.gif
WeldingWeb Artisan
Join Date: Aug 2008
Location: Dansville NY/Ft Myers FL
Posts: 2,414


Re: Everlast CUT60 received for Test
Ok here's some picture's of the unit before it Everlast's send their Prepaid shipping label

1st frontal picture of the unit you can see just how powerful the cooling fan is.

2nd the cooling fan intake is huge on this unit

3rd Notice the heavy duty soldering connections.

4th top shot photo

5th side shot photo
Attached Images http://weldingweb.com/attachment.php...1&d=1239552524 http://weldingweb.com/attachment.php...1&d=1239552540 http://weldingweb.com/attachment.php...1&d=1239552561 http://weldingweb.com/attachment.php...1&d=1239552581 http://weldingweb.com/attachment.php...1&d=1239552593

Re: Everlast CUT60 received for Test
1st Pierce Test Aluminum 1/16, 1/8, 1/4, 5/16, 3/4"

2nd Cut Aluminum 1/16, 1/8, 1/4, 5/16, 3/4"

3rd Pierce and Cut Steel 1/4, 3/8, 1/2, 3/4"

4th Cut Steel 1"

5th Cut Steel 1 1/4"

Sorry for the delay in pictures. But I just got that Sony Mini dvd camera back from the repair shop.
Attached Images http://weldingweb.com/attachment.php...1&d=1239554485 http://weldingweb.com/attachment.php...1&d=1239554505 http://weldingweb.com/attachment.php...1&d=1239554528 http://weldingweb.com/attachment.php...1&d=1239554548 http://weldingweb.com/attachment.php...1&d=1239554591

__________________
Own farm:Harris oxyacy torch, lincoln 225, stick,Century 135GL mig, Hypertherm PowerMax 45 Plasma Cutter
Co-Own CNC shop:Miller :1251 plasma cutter, MaxStar 700 TIG/Stick, & XMT 456 Multiprocess Welder.Hypertherm HPR260 Plasma Cutter

Re: Everlast CUT60 received for Test
Ok Everlast sent a rolling standoff with their unit. I decided to finally give it a test.

1st Picture shows standoff on 1/4" steel

2nd Picture shows the cut 1/4" steel

3rd Picture shows standoff on 1/2" steel

4th Picture shows the cut 1/2" steel

The rolling standoff maintained a 1/4". I tried to adjust to a standard 1/16-1/8" standoff but found I could not adjust the way it fits. It maintains a fixed standoff of 1/4". I think the cuts would be better if the rolling standoff was fixed at 1/16" or 1/8". I felt the 1/4" was a bit to far from the material to give a real fine quality cut.
Attached Images http://weldingweb.com/attachment.php...1&d=1239580335 http://weldingweb.com/attachment.php...1&d=1239580373 http://weldingweb.com/attachment.php...1&d=1239580411 http://weldingweb.com/attachment.php...1&d=1239580447