Gravy's post from P4x4.com

http://www.pirate4x4.com/forum/images/icons/icon10.gif http://www.pirate4x4.com/forum/showt...=782388&page=3


I bought a power plasma 50 a few weeks back and I've been very impressed so far. I've only test cut up to 3/4" but it handled it quite well.



It seems I'm going through tips faster than I thought I would, but I haven't owned a plasma before so I can't say for certain if that's normal or not.



The unit came packaged well and arrived on time. I did have to wire up a plug since no plug came with the unit.




I've yet to try it on 110v but it works great at 220.



It seems like if the tip is worn at all or the air pressure is off even a little it just won't cut at all. More than likely though, I just need to practice my technique.



it makes nice clean cuts and the Kerf is quite thin with the power adjusted right.

http://i170.photobucket.com/albums/u...MzUuanBn-1.jpg


and my fiance' seems to like it a lot http://www.pirate4x4.com/forum/image...es/biggrin.gif so that's a plus.
http://i170.photobucket.com/albums/u...cuanBn-1-1.jpg

http://i170.photobucket.com/albums/u...AwMzMuanBn.jpg
__________________
Gravesdiggerxj 44/9 XJ HP60 waiting
fabn & wheeln is about having fun if not you're doing it wrong

http://www.pirate4x4.com/forum/image...er_offline.gif http://www.pirate4x4.com/forum/image...ons/report.gif http://www.pirate4x4.com/forum/images/buttons/quote.gif