I have a number of welders. One of my favourite is my everlast 140STI unfortunately while using it on a big generator while welding up my John Deere manure spreader in the field -- it died. Dirty Power seems to have been the problem. New generators avoid that problem so I will have to buy one Inspecting the 140STI we found that there is a capacitor in position #C5 on the Board. Fried It appears to be the same as one in C4 position. but we cannot read ...
Hi, all of you. I would like to buy a MIG welder from Everlast brand. I want to get your valuable advice about this MIG welder. I have got some information about Everlast 2017 version. Is this enough for this MIG welder machine. Here is the information linkabout this Everlast MIG welder. http://weldermagazine.com/2017-everl...oltage-review/
Originally Posted by performance Can you say which settings are giving you the most trouble? Or are you messing with more than the amperage when you go to stick or DC TIG? AC and DC tig , about 60 amps for steel, 100% argon, pre flow 1 sec, post flow 8 sec. DC setting, pedal and good bye electrode !
Originally Posted by pflacourjr Been doing some research on Everlast Tig welders, got my eyes on the PowerPro 205s and the 256S models, can anyone give me any input on the machines. Thanks
I have a Everlast 230EX which I weld Aluminium with . I have never welded stainless , can somebody give me the basic settings I need to get started i.e. pulse or no pulse ,neg. earth or pos. earth, ac or dc, balance etc.
Archive
Recent Comments