Originally Posted by Franks After a short time, regular commenters begin to make a community. It starts to feel intrusive to insert yourself. Great article Lot's of information to Read. Guns For Sale Selections
For the closely spaced wheels of dual and dual-tandem legs and even for adjacent legs of aircraft with complicated undercarriages the effects of distributed loads from adjacent wheels overlap at the subgrade level. In such situations, the successful pressures are these combined from two or far more wheels and ought to be attenuated sufficiently by the pavement structure. Within a subgrade strength category the relative effects of two aircraft types on pavements can be uniquely stated with very good ...
I have a dv200 tig on 110v. Trying to weld thin aluminum Butt weld and corner welds. Tried setting frequency to 210 with low cleaning at 20 percent have my Amps at 20 Amos the lowest. Argon at 15 cup#5 using gray tungsten 1/16 Using a diffuser in the cup. Burns through the aluminum almost immediately. Looking for the best settings as I?m fairly new to tig welding. Any help would be greatly appreciated. Randy
I have a number of welders. One of my favourite is my everlast 140STI unfortunately while using it on a big generator while welding up my John Deere manure spreader in the field -- it died. Dirty Power seems to have been the problem. New generators avoid that problem so I will have to buy one Inspecting the 140STI we found that there is a capacitor in position #C5 on the Board. Fried It appears to be the same as one in C4 position. but we cannot read ...
Archive
Recent Comments