Has any one stick welded alum. with unit.Have bought inverter back in 2000 had to pay extra,plus that extra money made it possable to run 6010 insted of 6011 due to cellulose in 6010.
spent the day relaxing and decided to make a mount for my wheelchair for my droid. Nothing major just functional. After that went to Home Depot, Lowes and a few other local places looking at Drill Presses. Heres what I came up with for my Droid mount on my wheelchair . last pic is blurry but I'm tired and don't feel like fissing over it . just shows the GPS Nav screen so when I get off the bus it will take me via the quickest route to my destination. Attachment 1554Attachment 1555Attachment 1553 ...
Updated 04-08-2011 at 06:18 AM by aaxiss
So this final picture is the blade part of my turbine assembly. Hope you enjoy.
The first pic was the start of the steam generator. I wont show everything together for proprietary reasons. Not that I am making any money off this. But I do put a lot of work into my inventions and designs. This second pic is the injectors themselves. Again, lots of welding on this. Im sure you can see my amateurish welding at work.
Hello again, Sorry I have been busy latley. Here are some of the pics I mentioned. Again, keep in mind I am just learning to tig weld. No classes or anything. Just my own homework and whatever I pick up here and there. Some of the work is unfinished. I am still truggling with doing my T joints.Especially on curved objects. You will notice on the injectors a lot of fill. Makes it look sloppy. However, this is my prototype and its nothing some grinding work cant solve. A lot ...
Archive
Recent Comments