Originally Posted by Justinta Model SuperCut50P No255703962 I just would like to know if its a 220v 50amp plug or 110v 15 amp plug. At what amperage should I protect the unit ,is it 40 because its name plate says IMAX = 39 amps, but the power cord supplied and connected to the back of the unit is only 14 gauge which is rated for 15 amps. Is there any internal protection built in to protect the unit at 40amps? Could I put a 50 amp plug on the cord connected to the plasma cutter, my only welder ...
Match parts boom trailers and a cargo or dump truck, forestrybucket truckss are extremely specialized equipment. Used to care for, or that can prune tall trees, these trucks assist with very specific should have. Forestry trucks tend to be created to reach good branches, and are really usually mounted as well as articulated telescoping booms. The at the same time have provisions when considering storing lumber or debris that has to be hauled off. Original trucks lose regarding green ...
Originally Posted by Winky This will probably be my last post on this thread … some of you are probably saying … it’s about time ... lol. This, my first purchase of an Everlast product has been quite the adventure. I haven’t tried out the pedal yet but that’s me learn everything the hard way ... then when I introduce stuff that makes it easier it’s like WOW. That’s how I started welding in general first stick, then flux core, then Mig , then Ozy/acetylene the DCEN now AC/DC TIG … again the hard way ...
Originally Posted by Oleg Originally Posted by Winky Check your tracking status again ... I'm waiting for a 200DX ... UPS did a pick up scan a week ago but it didn't start moving until yesterday ... I'm thinking they had a whole lot of them and it just took awhile to get the shipments out. Winky B. Actually UPS took few days to unload the container, we shipped all on the 18th. My UPS guy called me late last night to tell me "good" news. at least i got few free overnight coupons from him. By the way ...
I'm on the verge of ordering my very first Everlast product and I'm excited about it ... it will be one of the 2012 200DX GTAW-P SMAW units and my palms get sweaty just thinking about it. Over the years I've taught myself to weld with stick, mig, flux core and DC scratch TIG this will be my first AC/DC unit and I think it's going to really broaden my capabilities. I've been using Miller, Lincoln, and Hobart and they are all great units but way too expensive ... I've read and watched a lot of good ...
Archive
Recent Comments