Activity Stream

Hi Mark, I would be extremely happy to go 'through' my 210ext and hopefully 'narrow it down' to a few components. If that doesn't work for whatever...

No. Not at this time. I guess we don't have maybe 3 or 4 requests each year, or at least I don't come across that many.

Welcome. We are here to help.

Call the guys at 877 755 9353 ext 207. It sounds as if the breaker is tripping and you have a bad pcb or igbt in the unit.

Thanks Sadly, that will be the last Al. project for the PP256. Glen

Gee, That sounds (smells) bad enough that I'd just call Everlast for an RMA and send it in to them, as it's on warrantee for the parts and labor....

Oh well, I was hoping you'd get extra lucky that way.

Smokin', dude!

All polished, mounted and decals applied.

A small local electronics store had a replacement capacitor. The owner was able to read the label at that location on the board then look up the...

Does the one right next to where it was give some indication via a number? Is see an O.22 and something else, which doesn't necessarily mean the one...

No other problems, DC Tig, stick and Plasma work fine to full power. It would be nice to know the value for the capacitor. There are about 25...

And there it is! Maybe it's just a little "C" capacitor nodule-looking thing like that "C8" spot. You could probably get one locally and solder...

Well, I just noticed this 3Mirrors seller on Amazon has refined their product even further, and also have their TIG tungsten sharping head fitted...

I talked with Everlast extension 207 and verified that the small board on the LH side is the AC board Couldn't see anything wrong at first then ...

Forming the bottom

That sounds like a possible option. I could ship the board to the Everlast techie(s) for testing and repair. Is this the AC board? Left side of...

Yes, there is a separate part for AC. But it would be repaired, not replaced as the components are replaceable on the board on that machine.

Very custom, ready to race zero-turn! More photos. Welded up, then many hours sanding and smoothing to flush weld. After that I spent a lot of...

Yeah, I did an aluminum gas tank for a zero-turn mower a few years ago. I went to an electric fuel pump on it, rather than gravity-feed, as the...

Very nice!

The red tank is on my Thruxton R. It holds 14.5 litres, not much more than a Commando Roadster tank (12litres). I wanted a bit more capacity so the ...

Oh, Is that red tank the completed project, as I see it does have those Norton-like indents? If so, please post a fuller pic of the cycle. I...

Very cool! I had a 1971 Norton 750 Commando. It was my favorite motorcycle. The tank had the coolest shape, even if a little small in capacity....

Using the English Wheel . I built this English Wheel in 2011 using the Power Ultra 205 in Tig mode. The tubing is very heavy wall , 5/16",which makes...

Starting in to shape the sides and top