Activity Stream

Call, Everlast, Their phone tech service may not be contingent on the warrantee length. I mean, Mark, from Everlast, monitors this forum and...

Yeah, I wouldn't recommend any 115V MIG unit, especially a heavy transformer one, as it may not give you it's full rated output without a 30 amp...

IF a customer wants to keep their warranty in effect, then they should follow our advice. You can bet and suppose a lot here. Fine, but when it...

I'm sorry MC5W. But lets not revive 5 year old threads. Inverter welders can use lower amperages because of Arc force, but that will depend upon...

No. The torch stays in the negative for all TIG operation. Download your manual from the website. It is up on it. It covers pretty much everything...

Spot settings will get you everytime.

Inductance 75%. Start there. The results will vary based off the user's experience in setting a manual pulse. The 350P is a type of synergic pulse....

CallMeBurton, The Method To The Madness is that with some brands of water cooled TIG torches and water coolers the water fittings have left handed...

Hi Barry, I am glad that the ampere reduction when going from straight argon to a helium + argon mix is 1.5:1 . I also read somewhere or saw on...

Yeah, If you booger the tungsten up too bad, a flap-disc on an angle-grinder will do very well, in a pinch.

YOUR customer support tells me that Prestone Lowtox and Peak Sierra propylene glycol automotive antifreezes cannot be used for welders. Dow is the...

Update: well, I have to eat crow. The problem was "spot stitch". The machine turned on and had something called "spot stitch" on by default and...

Assumption: 20 views and nobody pointing out what I'm doing wrong, and after seeing another video on an MTS 275 with a failing MIG trigger I'm going...

Updates: - After taking the video I swapped the spacer and the spool per instruction. No difference. - I removed the wire entirely, no...

Yes, but DexCool doesn't have those... I'm tellin' ya, the MSDS (now SDS) of DexCool and Millers coolant are the same ;)

I see that the technology has improved over what went on during my first TIG course in 1984. I have been over to Arc-Zone and some of their tingsten...

Hi Mark, First of all, I would NOT retrofit a new DINSE panel socket to anybody's welder until it is at least twice as old as the warranty. Even...

I forgot to mention that flow of high frequency current in the water lines can be attenuated by installing high frequency ferrite magnetic cores...

Wade, i would not laugh if it turns out that you are commanding good money for your sculptures. I wish that I had the talent to be a movie star or...

Hey Blaster. One of the documents at Arc-Zone.com says that the coagulants in automotive antifreeze will plug up your TIG torch. Hood Chemical says...

Otherwise, An actual spot welder doesn't cost much.

Gee, I'll recommend getting the 255EXT, even if you have to wait or save a little for it. But it is on sale right now, marked-down about $500, to...