Activity Stream

Yeah, I used a #9 flex torch for a short time, years ago, but it did fail from a flexing crack pretty quickly, as I would often exceed its...

If you've over flexed the torch, you could have a small crack in the neck.

So I moved the welder 6 feet from my work and got a new bottle of Argon and same problem with the brown oxide . I hooked up the monster 26 torch that...

Yeah, What's your argon tank size, in CF? When my tanks (200 CF) get down to about 200 psi, the shielding seems to get compromised. You may...

Thanks Mark .It is pure argon and was working without the brown until recently (Still on my first tank of Argon ) . I hadn't thought about the...

Looks like mixed gas, or your welder is too close to where you are welding, or it is contaminated gas. And clean that mill scale that isn't quite...

Well, I’ve uploaded a video about this project to my YouTube Channel. And I’m happy to share with Everlast users any of these ideas, which may be...

No. This is screen printed on.

Thanks for the code! Are there any “ Everlast” decals or stickers available?

Its RAL 6018. We've put that paint code on here somewhere.

This one is out of warranty. Paint is bubbled and peeling all over. Was just inquiring if someone else has found a close match. I’d have to do the...

If its fairly new, call and ask about warranty on the cover.

Gee, I've never before heard anyone complain about the paint finish on an Everlast unit. I mean, my 210EXT is still brilliant and unblemished...

Yeah, Nice call on checking them anyway. You solved the mystery!

After pulling machine out of cart and pulling cover, I lightly blew out any dust. Not much if any in there. Tried a .035 feeler gauge and could not...

I have LPM gas flow gauge. Set at about 8 LPM,#8 cup. 2T pedal. I have a aftermarket pedal,Ss or something or another. I can put switch on but pedal...

Gee, Maybe you have the gas set with too much velocity. What's your CFH and cup size? Maybe you have pre-flow set too long. Try none, or .5...

The 200 is the better of the two.

It sounds as if it is in 4T. Move to 2T or pedal mode. Unfortunately that factory folded up as far as I know. We moved production to our other...

They will until they go out of business doing it. If the unit failed after shipping it back to you, then you need to contact the company direct....

I previously had the big water-cooled torch. Yes, machine has direct plug for water cooler. I think you?re right. At some point I smoked the original...

Nice, So, you probably just smoked the previous torch/cable/hose then? Was it gas-cooled, and now you're going to water-cooled? I'd check...

Sometimes we just get lucky... just before my 250EX quit working, I ordered a 20 series 25? torch. It arrived and when I hooked it up, machine worked.

Well, I took the bench made with some free wood and rebar concept a little further down the proverbial rabbit hole, by actually purchasing some...

Call, Everlast, Their phone tech service may not be contingent on the warrantee length. I mean, Mark, from Everlast, monitors this forum and...