Archive for the ‘Stud Welding’ Category

Stud welding

Wednesday, June 22nd, 2011

Stud welding is a form of spot welding. Here all the energy is concentrated into one spot to create a weld. The specialty of a stud welding is that a bolt is especially created for the purpose of welding and a nut is fed into the bolt to form the weld. The bolts are very often fed into the automatic spot welder.  The weld nuts will have a flange that will meet with the bolt to form a weld. The stud welding is also known as a stud arc welding. This welding type joins a stud and a bolt together for the purpose of welding. A flux called ferrule is used in stud welding. This flux will concentrate the heat that is generated so that the welding can be carried out. These form very effective welds and make sure that sturdy bonds are formed. The most common applications would be shipbuilding bridges are other huge steel structures.

Share

Tags: , ,
Posted in Stud Welding | No Comments »

Techniques To Improve Your Stud Welding

Wednesday, December 2nd, 2009

There are some invaluable suggestions that can transform the way you perform your stud welding as such. Once you have decided that you are going to stud weld, then choose the size that aptly fulfils the specifications posed by your task. Thirdly, keep the below listed instructions and procedures in mind and perform the welding process;

  • Depending upon the diameter of the stud, make sure you have enough power to successfully complete the task. In case of stainless steel studs power at least 10% more than that of normal power which would suffice for an average welder will be required.
  • Ensure all the connections are firm and secure.
  • For aluminum and magnesium especially reverse polarity of DC power will be vital. Steel and stainless steel are capable with straight.
  • A “C” clamp provides great stability helps you concentrate on your welder.
  • Activate the trigger only once and work without moving unnecessarily.
Share

Posted in Stud Welding | 2 Comments »