Do you guys notice that the forum is really slow or non-responsive lately? At times its great, quick and other times I cannot even get on.
Do you guys notice that the forum is really slow or non-responsive lately? At times its great, quick and other times I cannot even get on.
I am on three or four times daily and have not had an issue.....yet.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
It weird - I also am on other sites with no issues - I will have the everlast site hourglassing while I am on other sides trolling along...
I'm with Mike on this one, sometimes it is really snappy and then there are other times when the page takes forever or doesn't load at all. It has been going like that for quite a while now. I thought it was just me.
tool /tuːl/ n. An object that enables you to take advantage of the laws of physics and mechanics in such a way that you can seriously injure yourself.
Good here too... Maybe your local provider?
Miller 210 MIG
Eagle 3-Cylinder Compressor
Air Tools
Body Tools, Shrinker, Stretcher
Bead Blast Cabinet
Homebuilt Car Rotisserie
1971 Dodge Challenger, Pro-Touring, 6.1 Hemi, Fikse Wheels, 335/275 Tires (in progress)
Seems good here in SC. I have had it run slow at home but that is due to AT&T's sorry dsl (damn slow line) internet.
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
Click for>EVERLAST YOUTUBE CHANNEL VIDEOS
PP 256 (SOLD) : 2013 250EX : I-MIG 250P/w 20' Profax gun : Power Plasma 60/w p80 torch : Hobart Handler 135/w 12' .023" Profax gun : 3M Speedglas 9100XX
I'm not an expert or an Everlast employee, I'm just a hobby welder sharing my experience and helping where I can.
I live in Rutherfordton, NC. But I am in Hilton Head, SC right now.
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
So today I went to the forums, clicked on the TIG area, and the browser just sat there - the message at the bottom was "Waiting for Everlast Generators" - waited a full minute and then nuked it since nothing was happening. I tried it again, and it stalled, and I refreshed the page - and it worked...
It happens enough for me that I dread coming to the forum - I will check it on other computers to see if its my end...
Cheers,
Mike
I have had it time out every once in a while. But pretty rare. It seems like packet loss, not slow response, so if it doesn't respond is a few seconds, I go back a page and try again, usually with instant results. There is no point in waiting for the time out. You can always run something like Wireshark to figure out just what the problem is, but since there is usually nothing you can do about it, why bother. About the only thing is that if it's a slow or flaky DNS server, you could switch that and/or add a different secondary. I gave up on AT&T for DNS because of downtime and other problems, and now use Open DNS, most of the time. I hear good things about Google DNS, too.
Long arc, short arc, heliarc and in-the-dark!
Seems the forum is acting up or AT&T is. I have been trying to get on the forum for about an hour and I have not been able too....
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
Yes Something is amiss , I tried and got a server error for a couple of hours, Maybe someone forgot to feed the Hamsters.
PowerTig 200DX
Supercut 50P
PowerTig Micro 185 SOLD GREAT MACHINE
Millermatic 200
Miller Thunderbolt
Jet 1340 Lathe
Jet 20" Drill Press
Jet 12" Wet Band Saw
Kalamazoo H7 Bandsaw
Forward 12,000 lb 4 Post Lift
It was a godaddy DNS problem.
Long arc, short arc, heliarc and in-the-dark!
I hope Oleg has the webmasters updating the forum. I know I've been fighting many many bots for weeks now. Sucks to be popular, but Everlast is...
Mike R.
Email: everlast@us-it.net
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
Last edited by Scotty1; 09-11-2012 at 10:09 AM.
Scotty
250ex
W 300
CAT D4D Dozer 49J
Welded Products Brake Press 30 Tonne
Tos-Hostivar Tool & Cutter Grinder
Invicta Major shaper (1.2m stroke)
Oldfield & Schofield (lathe 1941 young) 5m bed,1.2m gap swing
CIG Transmig 275
Lincoln Weldanpower 225DC + 3.5kw 240AC v (Diesel Powered)