Diamond Plate Project with PP205 Plasma with Pics

[Winky]

There is one. I know I saw it not too long ago...It had a manual actuating arm...seems like it was on another forum.

I figured there had to be one out there somewhere ... it seemed like a natural ... Thanks, I'll look around.

[Rodsmachineshop]

was you talking about this I made one last week worked not that great , but got a better thought on making it

[Buggy Chief]

was you talking about this I made one last week worked not that great , but got a better thought on making it

Yes it was similar. The one I saw was a vertical component though. Same concept.

[Rodsmachineshop]

I didn't like this since if you trace something it ended up traced backwards. I ordered the roller bearing and came up with abetter set up to trace and do straight cuts . i ordered a 100 bearings http://www.vxb.com/page/bearings/PROD/Kit7339

[everlastsupport]

Not a problem. Thanks for quality products!

Bought all three myself today.

The ripper I will get the money back in a couple days just splitting squared tubing.. Circles guide, just for fun, anyone want my plastic one I made (hahaha). Bought the stand off after a little thought, was gonna skip that, but the Everlast one makes a mess of the nozzle sometimes on the A81 torch. Will let you know how good DeWaynes guides work as well as the stand-off on the Trafimet A81.

[undercut]

I didn't like this since if you trace something it ended up traced backwards. I ordered the roller bearing and came up with abetter set up to trace and do straight cuts . i ordered a 100 bearings http://www.vxb.com/page/bearings/PROD/Kit7339

Once you've got everything worked out, would love to see some pictures!

[Buggy Chief]

Bought all three myself today.

The ripper I will get the money back in a couple days just splitting squared tubing.. Circles guide, just for fun, anyone want my plastic one I made (hahaha). Bought the stand off after a little thought, was gonna skip that, but the Everlast one makes a mess of the nozzle sometimes on the A81 torch. Will let you know how good DeWaynes guides work as well as the stand-off on the Trafimet A81.

Would be interested to hear your feedback. I love the machined quality and the ultra fine adjustments on mine. I too, bought all three and have used them and been pleased. The only thing is for the straight guide, you may have to buy longer aluminum 3/8 dowels. the ones that come with it are about 12 inches long. I needed to rip the 4x10 sheets of aluminum, so I bought a 6' 3/8 aluminum dowel and cut it in half, giving me 2 Three foot sections. Good luck !

[Winky]

I didn't like this since if you trace something it ended up traced backwards. I ordered the roller bearing and came up with abetter set up to trace and do straight cuts . i ordered a 100 bearings http://www.vxb.com/page/bearings/PROD/Kit7339

I would really like to see how your set up does ... please post when you get it worked out