Share
Page 1 of 2 12 LastLast
Results 1 to 20 of 30

Thread: A little somthing different.

  1. #1

    Default A little somthing different.

    If you guys don't know what a supermoto is, it's a racing dirt bike that has different wheels and suspension.

    Here is a pic of mine before the rebuild:


    THe bike in action:



    Well last trip out I messed up my steering head bearings. This is what happens when you do too many wheelies:


    Then I did this....
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  2. #2

    Default

    Back from powder:


    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  3. #3

    Default

    New master cylinder:




    New clamps:


    Adjusting the valves:


    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  4. #4

    Default

    New brake lines:


    New billet Brembo caliper:


    I had to order a new stem. Old one was too small:


    Rear caliper:


    Rear master:
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  5. #5

    Default

    My man cave:
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  6. #6

    Default

    Nice... what size engine and what's the cruise and top speed ?

    PP 256 (SOLD) : 2013 250EX : I-MIG 250P/w 20' Profax gun : Power Plasma 60/w p80 torch : Hobart Handler 135/w 12' .023" Profax gun : 3M Speedglas 9100XX
    I'm not an expert or an Everlast employee, I'm just a hobby welder sharing my experience and helping where I can.

  7. #7

    Default

    If I ever get fed up with being married, I'll just try a little motard project like that.

  8. #8

    Default

    Quote Originally Posted by zoama585 View Post
    Nice... what size engine and what's the cruise and top speed ?
    It's a 450cc. It has a small gas tank so not really made for crusing. But with the gearing I run, I can do 70 on the interstate easy. There is no really comfortable speed because it's a race bike, that's street legal.

    Top speed is 115ish. It's made for curves. But I can do 100mph with my knee on the deck.
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  9. #9

    Default

    Quote Originally Posted by jp2code View Post
    If I ever get fed up with being married, I'll just try a little motard project like that.
    It's the most fun you can have with your clothes on.
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  10. #10

    Default

    Hey 225

    why not go with Pitster ?
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  11. #11

    Default

    I raced moto and flat/short track when I was a kid MX and YZ days.

    SuperMoto was on and off road back in the day? Have not seen it is years. Pitster would not have the power of that thing.

    If I am right, were do you race. Any videos?
    Mike R.
    Email: everlast@us-it.net
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST

  12. #12

    Default

    yes the good old days i had a YZ 490 when they was still air cooled lol my first dirt bike was a 125 Suzuki RM
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  13. #13

    Default

    Quote Originally Posted by Rodsmachineshop View Post
    yes the good old days i had a YZ 490 when they was still air cooled lol my first dirt bike was a 125 Suzuki RM
    Road a white RM a few times a buddies bike. That was a few years ago.
    Mike R.
    Email: everlast@us-it.net
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST

  14. #14

    Default

    I own a Honda 50. I want a pitster because they make street legal 50's.

    Here I am 3 years ago at Deals Gap. On my 50.


    Will post all my youtube videos. Tomorrow. Or look up " deals gap supermoto" on youtube. Then look for users - sv650_pimpin, brapppforum. Both are my accounts.
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  15. #15

    Default

    Quote Originally Posted by everlastsupport View Post
    Road a white RM a few times a buddies bike. That was a few years ago.
    They have a big race series in FL.

    http://flsupermoto.com/
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  16. #16

    Default

    A few more pics.

    I couldn't make a group ride and my friends are funny....


    I work on a boat. Swamp people, be jealous:


    2 of 5 bikes I own:


    On my 50:


    In Tenn:
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  17. #17

    Default

    DOn't own this one anymore:


    Wife:


    More:



    Another bike I used to have:
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  18. #18

    Default

    My "touring" bike:


    It's kinda slow.....


    lololol...
    Everlast PowerTIG 200DX - w/ ck130 torch, thanks to Zoama585
    Everlast Power I-MIG 200 - w/15' TWECO Gun
    Everlast Power Plasma 60
    Victor Torch Set
    www.RedStickMoto.com

  19. #19

    Default

    Working on this for a good friend. Have a second coming after this one is done. It is for sale once carb is set.
    New carb, was not setup. It is fun as heck to ride. Bad pics, dark and crammed in a hole.
    Click image for larger version. 

Name:	2012-04-30-21-07-35.jpg 
Views:	60 
Size:	144.0 KB 
ID:	6446
    Click image for larger version. 

Name:	2012-04-30-21-06-56.jpg 
Views:	68 
Size:	139.8 KB 
ID:	6447

    I had a 160cc pitster from Oleg once. Was fast little thing. Ripped the valve stem in the grass in the first 20 minutes on the first ride. User Chadrock working on it and picture before plastics. Note size of motor. Oleg was a bit of an over-achiever.

    Click image for larger version. 

Name:	2010-09-04-17-02-08.jpg 
Views:	74 
Size:	148.6 KB 
ID:	6448Click image for larger version. 

Name:	2010-09-04-16-07-33.jpg 
Views:	77 
Size:	149.0 KB 
ID:	6449
    Mike R.
    Email: everlast@us-it.net
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST

  20. #20

    Default

    Supermotos are awesome! Nice bikes.

    I make trips up to the dragon every now and then. Definitely a fun road.
    "Engineering is the art of modelling materials we do not wholly understand, into shapes we cannot precisely analyze so as to withstand forces we cannot properly assess, in such a way that the public has no reason to suspect the extent of our ignorance."

    - Dr. AR Dykes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •