Share
Page 5 of 9 FirstFirst ... 34567 ... LastLast
Results 81 to 100 of 178

Thread: New Contest Dec 3 2011-March 3 2012

  1. #81

    Default

    Quote Originally Posted by d.fisher View Post
    I think this is the release page here: http://www.everlastgenerators.com/fo...8519#post18519

    Looks sweet!
    Thanks d..

  2. #82

    Default

    Miller Challenger 172 Mig
    Soon to be winner of a Powertig 210 EXT

    Wade Mortenson

  3. #83

    Default

    1) a. I 'liked' on face book. Facebook name Dyethor
    b. I subscribed to youtube channel. name Dyethor
    2) Registered as Dyethor
    3) Signature line filled.
    4) Avatar posted
    5) Post count start 4 now 106
    6) Finished post count requirement.
    7)Projects;
    Project #1
    Project #2
    Project #3
    Project #5
    Project #6
    Last edited by dyethor; 02-28-2012 at 04:05 PM. Reason: Added project #5 and #6
    Power tig 225lx
    Hand tools up the wazoo.

  4. #84

    Default

    1) “Like” our homepage on facebook. (State that you have liked us in your official entry here on this thread). This is optional, but it does count as an entry after the contest posting requirements are met. YOU MUST TELL US YOU HAVE LIKED US IN YOUR OFFICIAL ENTRY BELOW FOR IT TO COUNT.
    jeremy atkinson liked facebook DONE. subscribed to youtube DONE . following on twitter (nadja atkinson) DONE
    2) REGISTER YOUR NAME ON OUR FORUM
    done
    3) FILL OUT SIGNATURE LINE
    done
    4) POST AVATAR (ASK IF YOU NEED HELP)
    done
    5) STATE YOUR CURRENT POST COUNT HERE ON THIS THREAD AND SAY YOU ARE ENTERING THE CONTEST.
    I am entering the contest with 100 posts.GOAL= 200
    6) By the end of the contest, you must have 100 MORE posts than you have at the beginning. In other words, if you have 10 at the beginning of the contest, you must have 110 at the end, not just 100 total posts.
    START= 100 GOAL= 200 DONE
    7) Complete up to additional project posts to count toward a total of 6 possible entries.
    a) Projects should include: a) pictures b) details about size, dimension if applicable c) time took to complete, or estimated projection d) materials used e) discussion of why/how/what/etc was the reason you needed or wanted to do the project.
    b) State: This is project 1, project 2 from _____ (your screen name), a_________ (subject matter i.e.: fence) in the title line etc of the thread.

    PROJECT 1: cooler http://www.everlastgenerators.com/fo...RKY-tig-cooler
    PROJECT 2: cart http://www.everlastgenerators.com/fo...y-welding-cart
    PROJECT 3: gas tank http://www.everlastgenerators.com/fo...offin-gas-tank
    PROJECT 4: fenders http://www.everlastgenerators.com/fo...i-bike-fenders
    PROJECT 5: school test http://www.everlastgenerators.com/fo...-(3g-tig-root)
    Journeyman welder
    250EX
    Power plasma 60
    horizontal band saw
    Miller digital elite 'wicked' lid

  5. Default

    Wow another contest already. Exciting!!! I love the contests so im in.

    Liked on fb and subscribed on youtube- DONE
    am member- DONE
    got signature- DONE
    have avatar- DONE
    current post count is 146 and im entering now- DONE current not is 246

    Project 1. wedge repair http://www.everlastgenerators.com/fo...-slitter-wedge
    Project 2. log splitter http://www.everlastgenerators.com/fo...ter-for-loader
    Project 3. seat bracket http://www.everlastgenerators.com/fo...t-seat-bracket
    Gabe
    everlast power arc 200
    Lincoln electric 225 tombstone
    lawn mowers

  6. #86

    Default

    The contest is almost over I can't wait to win.
    Everlast PowerTig 250EX
    Everlast PowerCool 300
    Everlast PowerPlasma 70
    Lincoln Powermig 215
    Magnum SG Spool Gun
    Don't jump on my Gomba

  7. #87

    Default

    Post count met, started at 251 currently at 575.
    Subscribed to the youtube channel last contest.
    I'm not on facebook but I had two of my sons "like" everlast in the last contest.
    Click for>EVERLAST YOUTUBE CHANNEL VIDEOS

    I'm not an expert or an Everlast employee, I'm just a hobby welder sharing my experience and helping where I can.

    PP 256 (SOLD) : 2013 250EX : I-MIG 250P/w 20' Profax gun : Power Plasma 60/w p80 torch : Hobart Handler 135/w 12' .023" Profax gun : 3M Speedglas 9100XX

  8. #88

    Default

    There's only a few days left! Is everyone getting excited?
    -------------------------------------------
    Spike Customs, Inc.
    Fresno, CA 93727
    ph- 559-549-RIDE(7433)
    -------------------------------------------
    -Follow me on twitter!-

  9. #89

    Default

    1) Liked on Facebook! - Wrote on the Wall!
    2) REGISTER YOUR NAME ON OUR FORUM - Done
    3) FILL OUT SIGNATURE LINE - Done
    4) POST AVATAR - Done
    5) STATE YOUR CURRENT POST COUNT HERE ON THIS THREAD AND SAY YOU ARE ENTERING THE CONTEST - 308 Post
    6) 415 Post 2/26/2012
    7) Project 1 - Header Repair (Off Road)
    Project 2 - Storm Shelter (Repairs)
    Everlast Power Arc 200 --> Money Maker$$
    Everlast Power Arc 140ST
    Everlast IMig 200
    Everlast Power Tig 225lx
    Everlast Power Super Cut 50
    Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
    Everlast PowerTig 200DX - Sold! Fantastic Machine!
    Victor cutting torch
    HF 20 Ton Shop Press
    HF 4x6 Band Saw
    HF Air Compressor
    Northern Tool Drill Press
    Powerhouse 7000 watt generator


    www.murphywelding.com

  10. #90

    Default

    Quote Originally Posted by Spike View Post
    There's only a few days left! Is everyone getting excited?
    Yeah I can't wait to get my welder. Kidding I never win anything but it is exciting.
    Everlast PowerTig 250EX
    Everlast PowerCool 300
    Everlast PowerPlasma 70
    Lincoln Powermig 215
    Magnum SG Spool Gun
    Don't jump on my Gomba

  11. #91

    Default

    Quote Originally Posted by welderdude View Post
    Hey, count me in this sweet contest too!

    1: I don't have a facebook account, but I did subscribe to your you-tube channel "everlastgenerator".

    2: I'm registered as "welderdude"

    3: My signature is nicely filed out and updated.

    4: My avatar is there.

    5: I currently have 97 posts excluding this post and am officially entering the contest for the power tig 200 ext.

    Thanks Everlast for these awesome contests.

    I now have 199 posts excluding this post.

    I have 2 true welding related projects.

    http://www.everlastgenerators.com/fo...-tv-wall-mount

    http://www.everlastgenerators.com/fo...ng-tool-holder

    I also have 2 other projects that aren't directly related to welding. I don't know if they will count of not but here they are.

    http://www.everlastgenerators.com/fo...4759#post24759

    http://www.everlastgenerators.com/fo...d-F150-vs-mice!
    Everlast lx225
    Hobart Handler 210 with spool gun
    Hobart Stickmate LX
    Thermal Arc 400GMS
    40 amp Northern Tools plasma torch
    130 chicago electric tig welder
    90 amp chicago electric flux mig
    10"-22" Grizzly lathe
    15"-5.5" Grizzly vertical end mill

    In need of nice TIG machine. drooling over PowerTig 250ex

  12. #92

    Default

    Quote Originally Posted by sportbike View Post
    Another contest sounds great. A 200 amp version of the EXT sounds like a great, all around welder.

    1)Liked on FB, and subscribed to the Youtube Channel
    2) been a member for awhile
    3) good to go on the signature
    4) have an avatar
    5)Current pot count is 217 and I am entering the contest

    John
    Post count currently at 329
    Liked on FB
    Subscribed on Youtube

    1 Project: http://www.everlastgenerators.com/fo...-modifications

    John
    Everlast 200DX
    Everlast PT185
    Shoptask 3-in-1 (not currently in my garage, but I own it...)

    Any day on a motorcycle like this that ends just needing parts and labor is a good day.
    4.82, 158.67mph 1/8th mile 7.350, 195.82mph 1/4 mile

  13. #93

    Default

    I think I have met all requirements for the contest
    1-Liked on facebook
    Subscribed to Everlast youtube channel
    2-Registered name on this forum
    3-Signature filled out
    4-Avatar pic posted
    5-Post count at my entry was 5 now 108
    6- Project # 1- 9 inch Ford Narrowing jig. http://www.everlastgenerators.com/fo...-Narrowing-Jig
    Project # 2- Portable welding table. http://www.everlastgenerators.com/fo...-welding-table
    Project # 3- Welding Cart. http://www.everlastgenerators.com/fo...r-Welding-Cart
    Project # 4- EZ Curl Bar. http://www.everlastgenerators.com/fo...-4-EZ-Curl-Bar
    Last edited by Buzz; 04-02-2012 at 08:04 PM.
    Everlast PowerTig 200DX
    Snapon FM140 Mig
    Purox Oxy/Acet Torch
    Coleman 80 gal. Compressor
    7x10 Mini Lathe
    Craftsman 12" Bandsaw
    Lots of litler stuff

  14. #94

    Default

    Uh-oh! Hey Buzz, it looks like someone has deleted all your posts. You're back to 1.

  15. #95

  16. #96

    Default

    Your a cruel man!!
    Gil
    powerpro 256
    lincoln 185

  17. #97

    Default

    LOL! you did make me look.
    Quote Originally Posted by jp2code View Post
    Made you look!
    Everlast PowerTig 200DX
    Snapon FM140 Mig
    Purox Oxy/Acet Torch
    Coleman 80 gal. Compressor
    7x10 Mini Lathe
    Craftsman 12" Bandsaw
    Lots of litler stuff

  18. #98
    Join Date
    Oct 2011
    Location
    Litchfield Park, AZ
    Posts
    370

    Default

    1-Liked on facebook
    under my name David Van Allen
    Subscribed to Everlast youtube channel
    2- Suscribed to Twitter and liked Everlast, name under DVA
    3-Registered name on this forum
    4-Signature filled out
    5-Avatar pic posted
    5-Post count at my entry was 112 now 214
    6- Project # 1- BBQ Jig- http://www.everlastgenerators.com/fo...or-making-BBQs
    Project # 2- Tig Water Cooler http://www.everlastgenerators.com/fo...G-Water-Cooler
    Project # 3- Vise Stand. http://www.everlastgenerators.com/fo...DVA-Vise-Stand
    Miller 252
    PowerTig 250 EXT
    Evolution Rage 2
    48X6 inch Belt Sander w/ 9 inch Disk Sander
    ...

  19. #99

    Default

    7 Entries for me please.

    I started at 256 Posts and currently have 364. I have completed "Liking our Facebook page, joining our Youtube channel orfollowing us on Twitter each count as additional separate entries.". I have 3 Projects for this contest.
    Jason
    Everlast 255EXT - Perfection
    Everlast PowerPro 256 - UPS Demolished
    Everlast MTS200s
    12 Ton Shop Press
    DeWalt Hand Tools/ChopSaw

  20. #100
    Join Date
    Feb 2011
    Location
    Fridley, Minnesota
    Posts
    376

    Default Hooda's Follow up post to finish qualifying

    1) “Like” our homepage on facebook. (State that you have liked us in your official entry here on this thread). This is optional, but it does count as an entry after the contest posting requirements are met. YOU MUST TELL US YOU HAVE LIKED US IN YOUR OFFICIAL ENTRY BELOW FOR IT TO COUNT.
    I have: "liked" the everlast homepage on facebook
    subscribed to youtube channel
    attempted to follow on twitter

    2) REGISTER YOUR NAME ON OUR FORUM
    I am registered

    3) FILL OUT SIGNATURE LINE
    My signature line is filled out

    4) POST AVATAR (ASK IF YOU NEED HELP)
    My Avatar is posted

    5) STATE YOUR CURRENT POST COUNT HERE ON THIS THREAD AND SAY YOU ARE ENTERING THE CONTEST.
    My starting post count was 179, and my current post count is 303, I have enough.

    6) By the end of the contest, you must have 100 MORE posts than you have at the beginning. In other words, if you have 10 at the beginning of the contest, you must have 110 at the end, not just 100 total posts.
    124 posts, and counting

    7) Complete up to additional project posts to count toward a total of 6 possible entries.
    Wow, 10 total entries possible!

    a) Projects should include: a) pictures b) details about size, dimension if applicable c) time took to complete, or estimated projection d) materials used e) discussion of why/how/what/etc was the reason you needed or wanted to do the project.
    b) State: This is project 1, project 2 from _____ (your screen name), a_________ (subject matter i.e.: fence) in the title line etc of the thread.
    Here's my 6 projects. I got the numbering system goobed up, but it was indeed six projects in the time frame of the contest

    Project #1-3 Form Hooda-Snowblower modification

    Project #2-3 From Hooda-Caravan engine rehab

    Project #2-4 From Hooda-Test/review of 3 ADF Welding helmets

    Project 2-5 From Hooda- Engin stand mod for HD use.

    Project 2-6 from Hooda-Weld Blowoff valve on intercooler

    project 2-7 from Hooda-reinforce valve spring compressor





    Please post a follow up in this thread when you have completed your post count required for qualification before the end of the contest. Sum up your projects with links to the projects. This will help out greatly. Please, do not go back and reedit your original entry!
    "It's not magic it's experimental, kind of like washing your hands after pooping used to be." -House

    Everlast PowerTig 250EX-arrived 1-26-2012
    Everlast PowerCool W300-arrived 1-26-2012
    Everlast PowerTig 185 Micro-arrived 1-26-2012
    Everlast PowerPlasma 70-arrived 1-26-2012
    ESAB MigMaster 250-borrowed
    HyperTherm 151 AKA "The Light Sabre"
    Linde UCC-305-964 lb. of old time water cooled TIG love-SOLD-Bad MOJO
    Purox OXY/ACETYLENE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •