Share
Results 1 to 6 of 6

Thread: 4 Everlast Welding Machines

  1. #1

    Default 4 Everlast Welding Machines

    I've been waiting a while, but decided it's time for me to give testimonial for Everlast. My first purchase Everlast 200dx Tig has ran like a champ from day one, I wish I used the machine more, but when I have used it; I ran it hard for several hours. My second purchase was a Power Arc 200 that I run off my generator for mobile welding. I used it to start a small welding business. All I can say is the Power Arc 200 is a beast, its my favorite machine. My third purchase is a PowerArc 140st. It started out blowing fuses, had some issues. Mark called me on a Saturday evening to help me out. Mike also helped me out as well. I got a bad machine, contacted Oleg and a return label was sent out very quick! Got the replacement and have never looked back. It's a great little machine, I use it for mostly 110v smaller things that I do not need my power arc 200. I have used the tig setup as well. I think the Power Arc 140 is a very good value and good machine. Comes with tig torch, and heavy duty stinger. This week I ran my 140ST off my generator, and it barely changes the engine tone of my generator. My fourth purchase is the Imig 200. I sold my Millermatic 211 because I wanted a more efficient inverter machine so I can run it off my generator. I've been very happy with the overall performance of the Imig 200 as well. I needed something I could lug around a job and the Imig 200 fits my needs. Overall I have been very happy with the service I have received from Everlast. I always wondered how Everlast would react if I had a problem, and they proved themselves by quickly responding to emails that were after hours and weekends. I was not expecting to get responses to my emails until their normal operating hours. So far I have no complaints and Everlast has done me right. In my opinion with any products you buy, car, truck, tools, welding machines service after the sale is always important. Everlast has stood behind the products I have purchased from them. Thanks for all your help, the contest, and service.

    Sean Murphy
    Everlast Power Arc 200 --> Money Maker$$
    Everlast Power Arc 140ST
    Everlast IMig 200
    Everlast Power Tig 225lx
    Everlast Power Super Cut 50
    Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
    Everlast PowerTig 200DX - Sold! Fantastic Machine!
    Victor cutting torch
    HF 20 Ton Shop Press
    HF 4x6 Band Saw
    HF Air Compressor
    Northern Tool Drill Press
    Powerhouse 7000 watt generator


    www.murphywelding.com

  2. #2

    Default

    Hi Sean, 4 purchases is pretty good, soon you will be catching up to me, 6 units , 8 if you count the spool gun and water cooler. You are right about the Power Arc 200, everybody should have at least one of those. A friend of my brothers droped by a few days ago and used my PA 200, and he was impressed with it, he gave it high praise, that means something to me cause he is a pro, been fabricating for many years, so he knows what he's talking about.

  3. #3
    Join Date
    Oct 2011
    Location
    Litchfield Park, AZ
    Posts
    370

    Default

    Sean,

    That you sure do have many welders. What type of generator are you running?
    Miller 252
    PowerTig 250 EXT
    Evolution Rage 2
    48X6 inch Belt Sander w/ 9 inch Disk Sander
    ...

  4. #4

    Default

    Powerhorse 7000 from Northern Tool, it was on sale this summer $549.00, and I purchased the two year extended warranty which covers accidental damage.
    Everlast Power Arc 200 --> Money Maker$$
    Everlast Power Arc 140ST
    Everlast IMig 200
    Everlast Power Tig 225lx
    Everlast Power Super Cut 50
    Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
    Everlast PowerTig 200DX - Sold! Fantastic Machine!
    Victor cutting torch
    HF 20 Ton Shop Press
    HF 4x6 Band Saw
    HF Air Compressor
    Northern Tool Drill Press
    Powerhouse 7000 watt generator


    www.murphywelding.com

  5. #5
    Join Date
    Oct 2011
    Location
    Litchfield Park, AZ
    Posts
    370

    Default

    Thanks, I will check out their generators.
    Miller 252
    PowerTig 250 EXT
    Evolution Rage 2
    48X6 inch Belt Sander w/ 9 inch Disk Sander
    ...

  6. #6

    Default

    What I like about Northern Tool is how their warranty works. My generator had a two year warranty, their extended warranty covers an additional two years. They offer different levels of warranty, one the covers accidental, commercial, etc. It works out well if you are within driving distance of a Northern Tool store.
    Everlast Power Arc 200 --> Money Maker$$
    Everlast Power Arc 140ST
    Everlast IMig 200
    Everlast Power Tig 225lx
    Everlast Power Super Cut 50
    Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
    Everlast PowerTig 200DX - Sold! Fantastic Machine!
    Victor cutting torch
    HF 20 Ton Shop Press
    HF 4x6 Band Saw
    HF Air Compressor
    Northern Tool Drill Press
    Powerhouse 7000 watt generator


    www.murphywelding.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •