Share
Results 1 to 2 of 2

Thread: Power I-MIG 160 output on 120?

Hybrid View

  1. #1

    Default Power I-MIG 160 output on 120?

    I have been searching around, but haven't found any information on the max output for the Power I-MIG 160 on a 20 amp at 120 volts. I would think it would be more efficient than a regular transformer based welder.
    Everlast lx225
    Hobart Handler 210 with spool gun
    Hobart Stickmate LX
    Thermal Arc 400GMS
    40 amp Northern Tools plasma torch
    130 chicago electric tig welder
    90 amp chicago electric flux mig
    10"-22" Grizzly lathe
    15"-5.5" Grizzly vertical end mill

    In need of nice TIG machine. drooling over PowerTig 250ex

  2. #2

    Default

    Right now we have some new units coming in that are 140 amps that will be 120 V. The I MIG 160 may be replaced by it...so we are not carrying large quantities, if any at this time until we see how the new 140 works out for sales. You can call in and find out if we have any.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •