Search:

Thanks guys i did some reading up on it before and after i posted, i just wasnt sure if anyone had any luck with it.

Hey all i love my PP256 to death done alot of work with it so far, i recently bought a new home and i have taken on the roll of welder/ fabricator in my neighbor hood. Who is to complain about free...

It wouldnt be hard to chage the 30 to a 40 amp breaker but the only concern would be come what is the gauge of wire and how far does it run to the plug.

Is this plug put in for the welder or other...

You know i am absoulute pleased with my pm256 so far, but he made a couple valid points. The 35% duty cycle when maxed out defiently would cut into your weld time though i have yet to weld at max 1/4...

Wow nice cart did you wing it or do you have any kinda of plans that you went off of?

LOL yup all operater error =P the word of the day is CLEAN, make sure everything is CLEAN CLEAN CLEAN! and your welds will look awsome other wise your just wasteing your time.

I hear ya there i was more or less just poseing the question because at work we use the non clorinated and someone said that its just the clorinated that causes the problems, So i was just asking....

Tell me about it but ye i got home tonight after work and layed a couple bead and they were just about what i expected to see. Decent stack need to work on timeing and spaceing but over all a lot...

Well i knwo after doing some research and talking to some welder budies i know, i used the wrong term. I was talking more about piting or bubbleing along the way. And it was cause by my error, after...

Well i think i actauly fixed my problem here, i was useing the recomeded balance based on a miller come to find out after reading another post here on the forums these machines are actualy oppiste of...

So i had some 1" x 1/4 flat steel stock laying around cut 4 4" and tacked them into a tube shape. started welding the edges up. Right of the bat someing was wrong. I really didnt use much filler rod...

So i got my new PM 256 working and i figured i would start practiceing welding aluminum. Had some scrap 1/4 and some scrap 3/8 maybe a little thinner. started on the 1/4 just laying rows of dimes...

So question on the breake clean, there is two different types of brake clean. Chlorinated and non-Chlorinated, i dont have a can here in front of me but are they both deadly or is it just the...

Ye i figured that out after reading some of the posts...

Used the plasma last night Worked perfect.

Went to start seting up my tig, hooked up my water cooler setup to ckech for proper flow... big suppries when water started shooting out the back of my...

I was seting up my tig today and my lines are screwd up as well...

Well got home from work last night, wired it up and hooked up the stick clamp and did a little bit of sitck welding. Works pretty good, tonight after work ill test plasma cutting and tomorow im...