Search:

if its not too late maybe a roll of wire for stainless steel if you ever work with it.

http://www.projekt6.com/jackal/GalleryRoot/build/100_3177.JPG

And started a piece to fill the rear of the wheel well and fit it to the R floor...

In the mean time I started closing up the rest of the openings trying to keep things from getting too far away from possibly looking OEM+...

Make the extension, this is actually thicker than the R rail but material I already had :thumbup:
http://www.projekt6.com/jackal/GalleryRoot/build/100_3097.JPG
Test fit...

As I said that rear will not line up
http://www.projekt6.com/jackal/GalleryRoot/build/100_3058.JPG
http://www.projekt6.com/jackal/GalleryRoot/build/100_3063.JPG

My cuts where not too bad...

Also cut the wheel wells leaving some material there.
http://www.projekt6.com/jackal/GalleryRoot/build/100_3039.JPG
http://www.projekt6.com/jackal/GalleryRoot/build/100_3040.JPG

cut the rails...

And finally it goes through the same process as the other side and gets put back on
http://www.projekt6.com/jackal/GalleryRoot/build/100_3009.JPG...

Welding it back on
http://www.projekt6.com/jackal/GalleryRoot/build/100_2967.JPG

Re-bend around pans.
http://www.projekt6.com/jackal/GalleryRoot/build/100_2971.JPG

Another problem which is...

Ihave not updated this in a long time so I will do by making a copy from another forum and over multiple posts since I am limited to 10 pics per post.


So I have been working on this on Saturdays...

prax here wants $300 for the 150 tanks and wont sell the 300+ tanks. I got a 300 tank from airgas for $273 with the first fill free. My 125cf I use for mig was just over $200 with the first fill...

I was going to say that the slow loading of the forum has been gone for a little while now.

I assume it also has the latest style foot pedal? Also if so, does it have the same connector as the MTS200s and would it function with it since my MTS200s did not come with a foot pedal?

Awesome.. thanks for making the updates. This makes me :D

That is pretty sweet.



That or as a travel unit while the bigger 220 machines can sit at home.. I have had a few places I could have made use of 110 as they don't have a 220 line near the area...

pretty sure i run my digital elite in X-Mode all the time with auto darkening. I have the previous head gear but don't really have a problem with it falling down.

this def has more to it than my MTS 200s

I am waiting for my 255ext to start some new projects. It would be nice to be able to include old ones if they are large in size. One of my projects is a huge project that takes a ton of time.

I have been using 1.5% lanthanated for all my tig needs and have not had any problems with it even at 200A on aluminum.

As a software Engineer myself, I can tell you that sometimes the deadlines will be missed. The company I work for contracted a project that was suppose to be done last October and we are now working...

I too agree that this video was better even though I did get distracted some, I came back to it before shortly after.

I think he is providing good information for beginners and with the Everlast sitting in front does do some advertising of the unit. Like most of you guys I too loose focus during his videos.

I like those. The only thing I would consider different is putting the wood seat closer to the base that it sits on. As to the profit, tools in trade for work is always a good thing :p

aw ok i must have overlooked that..:)

I too have the MTS200s and only had a couple of problems at first but they ironed themselves out. I have also used a Lincoln for a long time and I have to say it really wasn't quieter than the...

I had one that leaked at the treads in the bottle also. I taped it and it still leaked. Finally I got out a big ### wrench and tighted it pretty tight. Havent had a problem with it leaking since. I...