Search:

I have a new Procon pump for use to build a water cooler.

Max 250 psi , model 111A125F11AA

$55.00 plus shipping.

Sorry been out of town still have some left.

You will like the 200DX it is a good quality machine at a very favorable price. I have been welding since late 1971 and used the red machines yellow and blue machines. You will not be unhappy with...

I have Several boxes of 309L 3/32" x 36" Tig Rod $5.00 per pound , plus Shipping.

Currently down to about 45-50 pounds left.

Any pictures or photo's and pricing of the new torches that Everlast has available.
I am looking for a 25' 150 amp with the single superflex style hose cable. The newer style tig torch that came...

We had the same problems for years with a particular brand of wire in 1/16" and 5/64" dia, The process that puts the flux in the wire was faulty. The wire started as a flat piece of material. As it...

Congrats to all the Winners, No all you have to do is figure out what you need or want. I know what i need but the funds are not there .

Yes make sure it is not a dual shield wire. Also dual shield wire with 75/25 gas mix will make a nice weld blue in color and have a slicker or smoother finish. It will also shed the flux very easily....

I have owned both machines, upgraded to the 200DX for the extra options and pulse. The 2013 185 is priced on Ebay $1020 with free pedal , no stick holder . The 200DX 2012 model with pulse on Amazon...

At some point in time it will fill up with moisture from condensation, It needs to be drained on a normal basis so not to rust thru the pipe or tube.

I have 10 spools anchor 035 welding wire, 33 pound spools ER70S-6 $45.00 plus shipping.

I'm afraid that seems sort of expensive after shipping is added...otherwise I might be interested. I can...

Heres one of some 22 ga parts i was fabbing for my car, the lead pencil tip is .045 dia. 25 amps dc

9675

Best focus i could get with the camera that close

I started with the 185 it was a good machine, but the extra features of the 200DX fitted my use better and and gave me more options when working on thin material.
To me the 185 is like a 3 speed...

Starting count 213 ending 347,

1 video http://www.everlastgenerators.com/forums/showthread.php/4211-Video-Review-Stick-Welding-With-PowerTig-200-DX
Projects as follows
# 4...

I quite buying in 2006 when i retired, i am just know needing to buy t shirts and socks.

My daughter sells unclaimed or lost freight, I look thru and see what i need or can afford the rod looked useful and was in good condition. It was a lot of rod but a lot of friends do iron work or...

Rod is Messer 80T AC Plus, I purchased about 1500 pounds of it and are trying to use up a couple of broken boxes that were on the pallet. It seems to be a nice rod runs similar to 7018 but not the...

Short review of the PowerTig 200DX in Stick mode AC at 156 amps , Rod size 5/32" 80T AC plus, Material 8" channel with 3 " channel for ends. This is to support 2 12 ton jacks on a four post lift....

Restoring my old ride and ordered some new floor braces they came without the tabs to spot weld them on. Used the 200DX set at 35 amps on DC w/6 cf gas flow and added the tabs to each floor brace....

I use Supercut blades in my metal band saws 14 or 18 TPI and wood band saws they have performed well with no problems. Bi metal vari tooth blades are great also but for heavier applications and most...

I would ask them what the duty cycle is for there compressor a plasma cutter will work one pretty good i would have a minimum of 30 gallons and more like 12cfm at 90 than 5.
The name brand...

The wood is Cypress it will weather outside forever, Used it for years in the wood shop making sash jamb and trim parts for older home restoration.

The newer torch that came with my 200 DX has the single power cable gas line combo and the black switch tie strapped to the handle. I would like to purchase a similar torch in a 17 series rigid or...

I have an older Jackson large Fixed Lens, and A Harbor Freight Red Flame ( works great for tig ) best helmet for the money $39.95. Also have some Tweco Weldskill Helmets, they did not work correct...

The dealer rep looked at me a little funny when i told him they were made in china. Pretty evident when like you say the stickers and cables all are made in China.
Looks like they are trying to get...