Search:

Man I want an MTS unit bad!

The Imig 200 is available.

I have this yellow jacket It was been well worth the investment!

If your thinking down the road you may get a CNC then go with a PP50 or 60S. I purchased a Super Cut 50 and then decided to embark on a DIY CNC journey; so I purchased a 60C. I think a separate...

I've emailed with Plasma Cam and they have told me Everlast Plasma cutters will work with their THC. From what I have been told their THC will work with any plasma cutter.

I owned a 200dx and currently own a 225lx and love them both! I am personally not a fan to the multi process machines with the plasma cutter (I never have owned one just my opinion). Everlast Tig...

Everlast offers a lease, but usually there is a low buyout at the end.
http://www.everlastgenerators.com/Lease.php

I would like to get an MTS unit and the new 60s plasma cutter. I've been happy with all my Everlast machines, just wanting to do some upgrading.

I listed three Everlast Machines on Amazon. Doing some consolidating and upgrading, all machines work great.
SuperCut 50
Power Arc 200
Imig 200

That's a good looking cutter! I've been wanting to sell my supercut 50 and do some upgrading!

Where I work we run.52 ( I believe) one step up from .45 Lincoln dual shield wire. I think it lays in flat and produces a nice looking weld. We run CO2 gas, I think 75/25 could be part of your...

Super Cut 50 is a high frequency cutter, some have been able to work around it, but it will require some work. Duty cycle will also be an issue as well. Go Torch is a 2x2 unit that is made or has...

still for sale!

When will these be available?

I ran across this on Ebay and checked out their website.

http://www.ezxycnc.com/CNC_PLASMA_TABLE_2x2_GANTRY_MAG_BASE_KIT_24__x_24_/p1916826_8799856.aspx

...

It will perform well on 115v, but in my opinion 220v is the way to go.

I ordered these!
http://www.amazon.com/3M-Respirator-7502-Respiratory-Protection/dp/B008MCUT86/ref=pd_bxgy_hi_img_y

I changed out the large filter's for these filters. These were on all the...

Yeah, don't forget me!!!!

I have 100 post!

One project
http://www.everlastgenerators.com/forums/showthread.php/3831-Project-1-Gate-Frame-Winter-Fun-Contest

Here are some youtube videos that I had done.
Imig 200 2600+...

How much power are you needing? What thickness are you planning to weld? If your doing a lot of 1/2" go with a Imig250p or MTS250. Try your best to get what you need, & not make a purchase on what...

I still have not had any time! I'm getting ready to move back home starting late this week. I had a couple of days planned out, but our baby sitter was sick and I was on baby duty. I've been...

Based off a tig welder I would say 1/4" but that's a guess.

These frames are placed along the fence line, I can't remember how far apart they are set. I believe the barbed wire will be terminated on one side and attached/started to the other....

Material was ordered pre-cut
http://i32.photobucket.com/albums/d2/smurphy_3/D7C4DB6F-5F20-453A-A0E6-7C4C4732526E-20383-00000A021AB243C9_zps43bb83f2.jpg

Coped out with a plasma cutter...

Imig 200 .35 mig wire uphill weld.
http://i32.photobucket.com/albums/d2/smurphy_3/FE0E8855-6312-4EB2-B106-AFCE13584F4F-20383-00000A030D92461A_zps0d5a5b12.jpg

More uphill...